10.50 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 60% M-H markers - topped up 1x jugful to 100% M-H markers
      Temperature +25.6 deg C dew point +9.6 deg C RH 36.2%

      DAQ continues OK to file May19/R11_8

      alpha background

      ASIC settings 2019May19-17.54.03
      slow comparator 0x64

      BNC PB-4 Pulser OFF

11.00 all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 1 & 2

      FEE64 temperatures OK - see attachment 3
      good event statistics OK - see attachments 4

      Merger OK - see attachment 5
      TapeServer OK - see attachment 6

      1.8.L spectra - see attachments 7 & 8
      p+n FEE64s 1.8.W spectra 20us FSR - attachment 9
      n+n FEE64s 1.8.W spectra 20us FSR - attachment 10

12.26 analysis of May19/R11_8 - see attachments 11
      deadtime OK

11.05 DAQ stop file May19/R11_8

      slow comparator 0x64 -> 0xa
      Check ASIC Control *all* ASICs & FEE64s

      good event statistics OK - see attachments 12
      11x < 20k, 20x <50k, 23x <100k

11.25 DAQ start file May19/R12

      Pulser walkthrough

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 
      amplitude 90,000 - 10,000 @ 10,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      frequency 250Hz range
      delay MIN
      tail pulse
      - polarity

      1.8.L spectra - see attachments 13 & 14

11.35 DAQ stop file May19/R12_1

11.48 DAQ start file May19/R13

      Pulser walkthrough

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 
      amplitude 12,000 - 2,000 @ 2,000 step
      x5 attenuator IN
      t_r 100ns tau_d 50us
      frequency 250Hz range
      delay MIN
      tail pulse
      - polarity

      1.8.L spectra - see attachments 15 & 16

11.55 DAQ stop file May19/R13_1

16.20 AIDA moved into DTAS
      Upstream edge of AIDA snout 17.7cm downstream of the upstream edge of the upstream DTAS NaI(Tl) detectors
      which positions DSSSDs #3 & #4 at centre of DTAS. We will need to adjust the position of AIDA when we have
      implant  and PID-gated implant-decay correlation data to identify where specific isotopes stop.

 
17.05 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 80% M-H markers
      Temperature +25.5 deg C dew point +9.3 deg C RH 35.9%

      detector biases & leakage currents OK - see attachments 17 & 18

      FEE64 temperatures OK - see attachment 19
      good event statistics OK - see attachments 20
      14x <20k, 22x <50k, 1x >100k


      BNC PB-4 
      amplitude 90,000
      x5 attenuator IN
      t_r 100ns tau_d 50us
      frequency 25Hz range
      delay MIN
      tail pulse
      - polarity

      1.8.L spectra - see attachments 21 & 22

FEE FWHM
#   (ch)
1   73
2   120
3   77
4   77
5   73
6   81
7   77
8   72
9   85
10  90
11  96
12  96
13  97
14  69
15  85
16  86
17  73
18  84
19  130
20  114
21  82
22  73
23  99
24  105

      p+n FEE64s 1.8.W spectra 20us, 200us, 2ms, 20ms FSR - attachments 23-26
      n+n FEE64s 1.8.W spectra 20us, 200us, 2ms, 20ms FSR - attachments 27-30