AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 12:27:05 2025
Author
*
:
Subject
*
:
> 15.01 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C > Water level c. 70% M-H markers - topup to 100% with 1x jugful water > Temperature +25.8 deg C dew point +8.0 deg C RH 32.4% > > Access to F11 from 14.00 whilst F3 & F7 plastic scintillator and PPAC are replaced due to rad damage > during online experiment > > DAQ continues OK > > ASIC settings 2019May19-17.54.03 > slow comparator 0xa > > BNC PB-4 Pulser > Amplitude 90,000 > x5 attenuator IN > Frequency 25Hz range > t_r 100ns, tau_d 50us > - polarity > Delay MIN, tail pulse > > all system wide checks OK *except* nnaida7 fails ADC calibration > > detector biases & leakage currents OK - see attachments 1 & 2 > > FEE64 temperatures OK - see attachment 3 > > good event statistics OK - see attachments 4 > 13x <20k 21x < 50k 24x <100k cf. 15x <20k, 21x < 50k, 24x < 100k yesterday evening > > Merger OK - see attachment 5 > TapeServer OK - see attachment 6 > > p+n FEE64s 1.8.W spectra 20us FSR - attachment 7 > n+n FEE64s 1.8.W spectra 20us FSR - attachment 8 > 1.8.L spectra - see attachments 9 & 10 > nnaida1 75 ch FWHM, nnaida3 82 ch FWHM - cf. 95 & 99 ch FWHM respectively yesterday afternoon > > FEE64 Rate spectra - attachment 11 > Check ASIC Control *all* FEE64s & ASICs x2 > FEE64 Rate spectra - attachment 12 - some channels recovered > > ADC data synchronised - attachment 11
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown