09:46 DAQ continues ok

      all system wide checks OK *except* nnaida7 fails ADC calibration
      
      detector biases & leakage currents OK - see attachment 1

      FEE64 temperatures OK - see attachment 2

      good event statistics ok - attachment 3

10:00 Merger & TapeServer ok - attachments 4 & 5

15.13 DAQ continues OK

      ASIC settings 2019May19-17.54.03
      slow comparator 0xa

      BNC PB-4 Pulser 
      Amplitude 90,000
      x5 attenuator IN
      Frequency 25Hz range, variable min. c. 2.5Hz
      t_r 100ns, tau_d 50us
      - polarity
      Delay MIN, tail pulse

      all system wide checks OK *except* nnaida7 fails ADC calibration

      detector biases & leakage currents OK - see attachments 6 & 7

      FEE64 temperatures OK - see attachment 8

      good event statistics - DSSSD#1 noisy - see attachments 9
      7x <20k 15x < 50k 20 < 100k cf. 8x <20k, 23x <50k, 24x <100k earlier today

      Check ASIC Control x2

      good event statistics - DSSSD#1 noisy - see attachments 10
      8x <20k 5x < 50k 20 < 100k cf. 8x <20k, 23x <50k, 24x <100k earlier today

      A, B. C & D Samtec connectors pressed into adaptor PCBs

15.41 good event statistics - OK - see attachments 11
      8x <20k 19x < 50k 20x < 100k

16.53 good event statistics - OK - see attachments 11
      8x <20k 19x < 50k 20x < 100k

17.04 p+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 14
      n+n FEE64s 1.8.W spectra 20us FSR - DSSSD#1 noisy - attachment 15
      1.8.L spectra - see attachments 12 & 13 
      nnaida1 75 ch FWHM, nnaida3 79 ch FWHM - cf. 76 & 83 ch FWHM respectively yesterday

17.05 all spectra zero'd
      DAQ stats zero'd

17.07 Julabo FL11006 chiller set point +20 deg C actual +20.0 deg C
      Water level c. 80% M-H markers 
      Temperature +23.4 deg C dew point +9.6 deg C RH 42.0%

17.10 leakage currents/detector bias ok - attachment 17