00.30 AIDA file R2_26
      DTAS run 007
      BigRIPS run 2006

00:55
      Merger status - attachment 1
      TapeSever status - attachment 2

01:40
      Before zeroing stats - attachment 3
      Histos up to now saved in /homes/npg/spectra/specs-2019Jun16-01.46.50
      Before zeroing histos - XY attachment 4

02:22  Up to AIDA R2_41
      Stats - attachment 5
      XY implants - attachment 6

02:29 AIDA R2_42 
      DTAS run 011
      BigRIPS still 2006

04:08 Up to AIDA R2_55
      Temps - attachment 7
      Biases - attachment 8
      Stats - attachment 9
      XY implants - attachment 10

04:50 Did some major UI updates to merger /data02/2019data/dtas/scripts/parallelscript/runall_xe19_dev.sh
         If no parameters are passed, it asks to select each option one-by-one, showing available options
             For DTAS, if there is only one run for a given header, it automatically selects it
         After that, it checks that all the raw files actually exist
         Finally, it composes the command, asks the user if it looks OK, and then launches the script (or quits)
         (For experts, it can still take the original case where all 7 parameters are passed at the command line)
         There may still be some minor bugs, so for now we don't replace the original one until Alvaro can check

06:09 Stats - attachment 11
      XY implant profiles -- attachment 12

06:30 DTAS 018; AIDA R2_80; BigRIPS 2009

Things getting a bit noisier?
      Merger - attachment 13
      TapeServer - attachment 14
      Stats - attachment 15

   The FEEs corresponding to DSSSD1 are all showing factors 2 to 10 higher than just 30 min. ago

   F11 rates still near 180 cps, primary beam still around 130 pnA.

06:43 Before I can diagnose the high noise problem in DSSSD1, it goes back to normal
      Merger - attachment 16
      TapeServer - attachment 17
      Stats - attachment 18
   Maybe the issue was from looking at the details too often :)

07:46 Shift change.

      DAQ continues running OK.
      Statistics show  noisy DSSD #1 (100-200kHz) - see attach 19
      Tapeserver also shows higher than normal write to disk rate - see attach 20
      After a few seconds write to disk rate goes back to normal - see attach 21
      Data items rate looks OK (500k). This was checked after the rates in DSSD#1 went back to normal - see attach 22
      FEE64 temperatures OK - see attach 23
      Implants look OK - see attach 24

      System-wide checks OK except nnaida7 fails ADC calibration as usual.

      Reset Statistics
      Stats now OK - see attach 25

      Reset HEC implants

      Timewarp events appear to be very frequent, consistently every 3-5 seconds.
      This seems to have been happening ever since beam was put on target.
      Analysed R2_94 using analyser in Desktop 3. No timewarps reported. See attach 26.
      
08:32 AIDA: R2_100,
      DTAS: 21  ,
      BigRips: 2010   

08:41 Another noise spike from DSSD#1
      Observed up to 1,600k data items per second - see attach 27
      Write to disk ~10 MB/s as before.
      See LEC xy plot - attach 28
      HEC xy plot shows no hints of issues - see attach 29
      
      Rate seems manageable - see attach 30 for analysis of noisy run R2_103. 
      Note few seconds deadtime in some FEE64 and unequal number of Pause/Resume in nnaida 22      

09:45 Rate in DSSD#1 back to normal. Data rate 500k, Write to disk 5 Mb/s.

10:00 Started compressing R2_* files to save disk space.
      Used nice gzip to compress to avoid conflicts with the DAQ.
      Status of compression can be checked in ELOG desktop in the terminal window running ls -alth

10:32 DTAS and BigRIPS stop runs
      AIDA on file R2_128

      DTAS:24
      BigRIPS 2011

10:56 Lost beam. BigRIPS and DTAS DAQs continue running. Accelerator operators advise beam should be back in 10 minutes.

11:12 Beam is back. BigRIPS & DTAS continue running and did not stop. AIDA file R2_133.

11:25 System-wide checks OK except nnaida7 fails ADC calibration as usual.
      Stats OK, but nnaida19 is a bit more noisy than befor (80k) - see attach 31
      Temperatures OK - see attach 32
      TapeServer & Merger OK - see attach 33, 34 - rates have been low since 10 am
      HEC xy plot OK - see attach 35

      Reset online spectra

      Leakage current OK - attach 36