AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Mar 30 09:18:12 2025
Author
*
:
Subject
*
:
10.37 Post - beam, AIDA & DTAS run only DTAS stop run 164 AIDA file R2_1012 10.54 DTAS start run 165 AIDA file R2_1015 DTAS begins calibration with 24Na source 11.06 DAQ continues running OK All system wide checks ok *except* nnaida7 fails ADC calibration FEE64 temperature OK - see attach 1 Good events rate OK - see attach 2 Leakage currents OK - see attach 3 Merger & Tape server OK - see 4 & 5 11.47 DTAS stop run 166 AIDA file R2_1022 12.03 DTAS start run 167 AIDA file R2_1025 Caesium measurement 13.18 DTAS stop run 169 AIDA file R2_1035 14.59 DTAS opens file run 172 AIDA file R2_1049 14.57 DAQ continues OK file RIBF147/R2_352 postrun background and gamma source tests ASIC settings 2019Jun13-08.56.35 DSSSD#1 slow comparator 0x1d DSSSD#2 slow comparator 0x8 BNC PB-4 Pulser Amplitude 90,000 x5 attenuator IN Frequency 25Hz range, variable min. c. 2.5Hz t_r 100ns, tau_d 50us - polarity Delay MIN, tail pulse all system wide checks OK *except* nnaida7 fails ADC calibration detector biases & leakage currents OK - see attachments 6 & 7 FEE64 temperatures OK - see attachment 8 good event statistics - OK - see attachment 9 11x <20k 22x < 50k 23x <100k Merger - 1x Q 21 error see attachment 10 TapeServer OK - see attachment 11 p+n FEE64s 1.8.W spectra 20us FSR - attachment 12 n+n FEE64s 1.8.W spectra 20us FSR - attachment 13 1.8.L spectra - see attachments 14 & 15 nnaida1 78 ch FWHM, nnaida3 81 ch FWHM 1.8.H spectra - see attachments 16 & 17 FEE64 Rate spectra - attachment 18 Check ASIC Control x1 11.04 analysis of file RIBF147/R2_1051 - attachment 19 deadtime <<1% all FEE64s *except* nnaida19 ~2% no timewarps 16.00 AIDA file R2_1058 DTAS sends sync pulse DTAS having issues with DAQ speed 16.30 DTAS stop 175 AIDA file R2_1062 16.32 pulser walkthrough start BNC PB-4 Pulser Amplitude 90,000 x5 attenuator IN Frequency 250Hz range, variable min. c. 25Hz t_r 100ns, tau_d 50us - polarity Delay MIN, tail pulse 90000 - 10000 in 10000 steps walkthrough file R3 - see attachments 20 & 21 12000 - 2000 in 2000 steps walkthrough file R5 - see attachments 22 & 24 ignore file R4 17.08 pulser walkthrough end 22.57 DAQ stop AIDA file TapeData/RIBF147/R6_49 DTASD stop on run 191
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown