AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 07:32:52 2025
Author
*
:
Subject
*
:
> Water Temp: 20 C - Flow felt on pipe > AIDA interlock OVERRIDE > > One USB Hub for the FEE64 TTYs was unplugged on cable tray, replugged in > (may fix Pi_Monitor) > > Bias DSSD (Ch 3) > Leakage current stays at 17 uA during ramp up. At 150 V it quickly drops back to 6 uA > Fig 1 > > Current FEE mapping > p+n aida09 aida01 aida10 > aida11 aida03 aida12 > > n+n aida02 aida04 > > Unused aida06 aida08 > > Due to merger need 8 FEEs 1-8 to merge properly will temporarily renumber for 1 DSSSD test > - Will revert to this numbering for experiment! > > Power up with unchanged configuration to test > > Fee Temps OK Figure 2 > > Start DAQ at 0x64 threshold (1 MeV) > Most channels 0 rate (expected) > ASIC01 of AIDA4 very hot > 2 channels in aida10 very hot > Figure 3 > > Pulser OFF and only connected to aida11 aida03 aida12 > LOCAL operation at present 10V/10X level, positive tail, 25 Hz > > STOP and Power off to renumber > > New mapping for now: > > p+n aida05 aida01 aida06 > aida07 aida03 aida08 > > n+n aida02 aida04 > > aida09 ---> aida05 > aida10 ---> aida06 > aida11 ---> aida07 > aida12 ---> aida08 > > - > > Backup dhcpd.conf -> dhcpd.conf231019 > Update to only first 8 fees > only turn on Relay 1 > > Update MIDAS Tcl > /MIDAS/config/TclHttpd/aidas-gsi@8015/startup.Tcl > list aida01... aida08 > > new folder > /home/npg/LayOut/GSI_triple_test_renumber > > copy to /tmp > > - > > Reboot MIDAS and Power on Relay 1 > Power OFF > Reboot dhcp! > > Anydesk Connection Lost?? > > Make new DB key 2023Oct19-13.46.30 > Copy aida01/CONTENTS (p+n) to aida06 and aida08 > Cannot update Options http://localhost:8015/AIDA/Options/Options.tml ? Error 500 > Figure 4 > Load settings manually and check-load ASIC > TODO: Manually change files, or? > > GO > > ADC items + rates figures 5, 6 > > Restart Merger > xfer Links (bad) > Netvar -> Inquire Registers > NetVar.MERGE.RunOptions WRITE 1 > > Merger now shows xfer Links => Merger > Merger GO > > Open file BG18OCT23 R1 > > STOP DAQ > Data Xfer #1 Enable > GO DAQ > > See merger links all GSI_triple_test_renumber > Enable output to data storage > xfer Links => Merger => storage > > See tape rate: 3 MB/s (!) > > Also start MBS on x86l-119 (new AIDA FDR) and try MBS relay > rate seen in MBS > > Figure 8 - Accumulated statistics for ca 3 hours > Figs 9, 10 - ADC spectra > > System turned off and DSSSD biased down for end of work day, due to water issue
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown