AIDA ASIC settuings 2023Nov16-18.55.20
     low comparator p+n FEE64s 0xa, n+n 0xf

     BNC PB-5 settings
     amplitide 10.0V
     attenuation x10
     decay time 1ms
     polarity + ( connected to FEE64 aida01 only )
     frequency 22Hz
     tail pulse
     remote control

16.46 per p+n FEE64 1.8.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 1-4
      per n+n FEE64 1.8.W spectra - 20us, 200us, 2ms & 20ms FSR - attachments 5-8

      DSSSD bias -150V leakage -5.690uA - attachment 9
      RH 32.7% ambient 2+3.2 deg C d.p. +5.9 deg C
      FEE64 temps OK - attachment 10


     bPlast configuration
     1x long and 1x short side connected to 3x bPlast booster PCBs
     Rohde & Schawrtz HMP4040 PSU ch 4 +4V ( ref'd to PSU chassis ground ) 
     Mesytec SiPM bias
     Screens of flat cables from bPlast to booster cards electrically connected together and to bPlast NIM bin c( below AIDA stand ) chassis
     bPlast NIM bin and TAMEX electrically isolated from AIDA stand/DESPEC platform

     Photos - attachments 11-16

17.00 Connect SC21 L disc o/p fan-out -> ESN LA8000 TTl output -> BNC PB-5 pulser ext trig
      Should enable triggering ( and delay ) of pulser from heavy-ions in scintillator SC21


17.17 LEC/MEC selection 0x -> 0x1
      ADC data item stats - attachment 20
      per FEE64 1.8.W spectra - 20us FSR - attachments 18-19
      per FEE64 Rate spectra - attachment 17
      BNC PB-5 pulser to aida01 - some channels missing asic # 2, 3 & 4
      aida04 asic# 1 rates still high but aida06 ( was aida10 ) high rates  in only two channels of asic #4
      Otherwise system very quiet as expected for MEC ( 1GeV FSR ).

17.56 LEC/MEC selection 0x1 -> 0x0

22.10 NH starts data transfer to Merger and TapeServer ( no storage mode ). Date Relay to MBS also started - see attachments  21-25

22.18 aida04 asic #1 slow comparator 0xf -> 0xff
      aida06 asic #4 slow comparator 0xa -> 0xff
      Merger data transfer c. 500k data items/s