AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
AIDA
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Nov 10 19:59:00 2024
Author
*
:
Subject
*
:
> Connect the BB7 on top of the snout to the former aida05 (FEE above aida01) > Also remove copper busbar that is unused > > Power on AIDA... rates terrible (attachment 1) > > Reground AIDA stand to platform base ... small improvement but nothng major > > Decide to power OFF, recheck all connections, aida02 ERNI maybe a bit loose, otherwise all good. > Remove BB7 to try to restore status quo ante > > Power on again and rates much improved (attachments 2 & 3) > Looks similar to attachment 44 on Aida test 17/11/23 > -> Back to status quo? > > > 15:05 : BB7 put back on the snout and connected (ground + HV) > No significant change has been noticed (attachments 4 & 5) > > Attach cables 14 to FEE that BB7 is connected - then will configure DHCP for aida09 > > Start up aida, configure as before. AIDA09 appears but is not configured (ASIC settings just copied from aida08 for now) > > Rates on aida look OK still (attachment 6) > > HV (attachment 7) > > Temps (attachment 8)
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown