| ID |
Date |
Author |
Subject |
|
509
|
Thu Dec 1 00:21:08 2016 |
DK | Offline analysis of R42_7 | Checking that the implantation is still reasonable after LN2 fill recovery.
Degrader condition is 8. + 0.2 mm Al on the upstream side of the PE wall.
All three variable degraders are in (0.5 mm W; 0.3 mm W; 1.0 mm W, each on 1 mm Al backing).
Confirmed degrader settings at 10.11 (right before a change was made after this run...)
*** data items: 261088000 ( 125355.46 Hz)
*** ADC events: 32885891 ( 15789.41 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5369750 old count: 5351200 dt: 283.23 s LEC rate: 18958.97 Hz
*** DSSSD # 2 count: 4958223 old count: 4941299 dt: 283.23 s LEC rate: 17505.99 Hz
*** DSSSD # 3 count: 2872405 old count: 2862650 dt: 283.23 s LEC rate: 10141.59 Hz
*** DSSSD # 4 count: 2367926 old count: 2359880 dt: 283.23 s LEC rate: 8360.43 Hz
*** DSSSD # 5 count: 2063809 old count: 2056797 dt: 283.23 s LEC rate: 7286.69 Hz
*** DSSSD # 6 count: 3582944 old count: 3570809 dt: 283.23 s LEC rate: 12650.29 Hz
*** DSSSD # 1 count: 61 old count: 61 dt: 283.23 s HEC rate: 0.22 Hz
*** DSSSD # 2 count: 82 old count: 82 dt: 283.23 s HEC rate: 0.29 Hz
*** DSSSD # 3 count: 111 old count: 111 dt: 283.23 s HEC rate: 0.39 Hz
*** DSSSD # 4 count: 71 old count: 71 dt: 283.23 s HEC rate: 0.25 Hz
*** DSSSD # 5 count: 42 old count: 42 dt: 283.23 s HEC rate: 0.15 Hz
*** DSSSD # 6 count: 9 old count: 9 dt: 283.23 s HEC rate: 0.03 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Thu Dec 1 09:11:23 2016
See attached histograms
Figure 5 shows low energy front and back, and if I compare to R41_2 offline analysis (i.e. https://elog.ph.ed.ac.uk/AIDA/507 ) then we see more fluctuation (of light ions?) it seems. Run 41_2 seems to show mostly noise (anti correlation) and here we see real ions (positive correlation. This is confirmed in our figure 4, where the statistics of DSSD#3 seems about doubled. The event rate per unit time in 41_2 shows a relatively flat top behavior characteristic of noise domination, where as our present one shows more jitter that could be characterized by light ion production and transport variation.
|
|
508
|
Wed Nov 30 21:26:52 2016 |
CG, DK, TD | Thursday 1 December | 00.51 BigRIPS data file 1112.
01.50 BigRIPS data file 1113.
02.55 BigRIPS data file 1114.
03.56 BigRIPS data file 1115.
04.58 BigRIPS data file 1116.
05.57 BigRIPS data file 1117.
06.26 Stopped run R41 @R41_126 ahead of LN2 fill.
Bias and leakage currents ok (attachments 1+2).
BRIKEN files 161130_1942_183.dlt to 161130_1942_197.dlt
06.54 BigRIPS data file 1118.
(DK arrives)
07.44 R42 started following LN2 fill. (BRIKEN computer had some problems, delaying restart.)
No synchronisation with BRIKEN during R42_0.
Re-sync pulse issued and synchronisation obtained 1.2GB into R42_0.
7.55 Big RIPS run 1119
(CG departs)
8.55 Big RIPS run 1120: corresponds roughly to AIDA R42_15
circa 9.00: Offline analysis of present condition: https://elog.ph.ed.ac.uk/AIDA/509
09.55 BigRIPS data file 1121
10.00 Beam is stopped for changing stripper foil. Nearly at the end of R42_27.
Previously there was 8. + 0.2 mm of Al on the upstream side of the PE wall
Pb bricks between MUSIC 1 and MUSIC 2 had the width reduced from 7.5 cm by ~1 cm compression on the beam
right side
So the total gap in this location should be
Now we have 5 mm Al between MUSIC 1 and MUSIC 2.
3. mm and 0.2 mm Al is on the upstream side of PE wall.
(Total thickness of Al degraders is not changed, only the distribution of the material around F11.)
(Variable degraders are not moved: 0.5 mm W + 0.3 mm W + 1.0 mm W (+3 mm Al backing))
10.08 BigRIPS data file 1122
10.09 Beam returns: 1.3 GB into R42_29
circa 12:00: offline analysis of present condition: https://elog.ph.ed.ac.uk/AIDA/510
11.09 BigRIPS data file 1123
(TD arrives, DK to lunch)
12.09 BigRIPS data file 1124
12.42 DAQ stops (RIBF03R1/R42_68) - overloaded /data10 filesystem sshd/rsync + rm
Unable to soft reset, power cycle FEE64s
13.11 DAQ starts (RIBF03R1/R43)
ASIC settings 2016Nov29-21.38.02
13.18 BRIKEN issues multiple syncs - attempting to reset correlation scalers
13.21 BigRIPS data file 1125
13.25 Correlation scalers now reset, SyncCheck OK
AIDA data file R43_2
BRIKEN data file 205
BigRIPS 1125 (circa 13.21)
15 cps at BigRIPS scaler F11 plastic; network camera for ZDS scaler has 55 cps
(DK return, TD to lunch and PAC)
15.26 BigRIPS setting changes from 40Mg setting to unreacted 41Al setting.
About half way in AIDA R43_27
BigRIPS #1127
F11 plastic at BigRIPS scaler is about 30 cps (doubled from before)
Brho settings:
D6 7.3989 Tm
D7 6.2253 Tm
D8 6.2405 Tm
16.25 Operator calls. The beam is stopped. They don't specify for how long and we don't know the exact
technical reason without native Japanese speaker
Phone rang in the beginning near AIDA R43_41
16.33 They put back the disable access radiation control...beam returns soon?
16.43 R43_47 run in AIDA, beam comes back.
F11 scint scaler of BigRIPS shows around 30 cps as before. (network camera scaler from ZDS shows about 80
cps)
BigRIPS data file 1128
16.58 Naive estimation of the energy loss difference of 40Mg and 41Al from different optics settings
Use D8 Brho of 6.3208 Tm of R21_0
40Mg energy after 8mm Al: 125 MeV/u
41Al " " " ": 140 MeV/u
Use D8 Brho of 6.2405 Tm as above for the present settings
40Mg energy after 7 mm Al: 125 MeV/u
41Al energy after 6.5 mm Al: 142 MeV/u
So, neglecting other stopping materials, the difference between implantation depths could be about 1 or 2
SSD layers towards the front of AIDA.
17.08 R43_53 removed variable degrader #1 (0.5 mm W [+1 mm Al])
Variable degrader setting is now #2 + #3: 0.3 mm W + 1.0 mm W [+2 mm Al]
17.14 SyncCheck OK
BRIKEN data file 210
AIDA data file R43_55
17.28 DSSSD bias & leakage currents OK - see attachments 3 & 4
FEE64 temperatures OK - see attachment 5
Visual scalers - see attachment 6
good events statistics - see attachment 7
System wide checks OK *except* nnaida13 fails ADC calibration and variable number of nnaida5, 7, 8, 15 & 16
fail clock status - bit 2 always set
17.49 BigRIPS data file 1129
Centre ZDS @ 40Mg
Change degrader to (8mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al, 1mm W/1mm Al) variable
17.53 SyncCheck OK
AIDA data file R43_64
BRIKEN data file 211
18.24 DAQ stops OK (RINF03R1/R43_71)
Ready for LN2 refill sequence
18.56 BigRIPS data file 1130
19.32 DAQ starts (RIBF03R1/R44)
19.35 SyncCheck OK
BRIKEN data file 213
AIDA data file R44_1
ASIC settings 2016Nov29-21.38.02
Degrader (8mm Al) fixed + (0.3mm W/1mm Al + 0.5mm W/1mm Al + 1mm W/1mm Al) variable
19.57 BigRIPS data file 1131
20.54 beam off for stripper foil change
21.04 1.8.W spectra -see attachments 8 & 9
good events stats - see attachment 10
Varying levels of 100kHz period extrinsic noise for FEE64s nnaida17, 18, 19 & 23
21.06 Back back
SyncCheck OK
BigRIPS data file 1132
AIDA data file R44_31
BRIKEN data file 214
21.55 SyncCheck OK
22.05 BigRIPS data file 1133
22.15 System-wide checks OK *except* nnaida13 fails ADC calibration and variable # of nnaida5, 7, 8, 15 & 16 fail
clock status - status bit 2 always set
23.04 BigRIPS data file 1134 |
|
507
|
Wed Nov 30 11:36:32 2016 |
TD | Offline analysis of R41_2 | Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm/1mm Al + 1mm W/1m Al) variable
Steering to F11 changed by PD
S O R T C O M P L E T E ..... Wed Nov 30 20:27:12 2016
*** ENTRY finish
*** data items: 261088000 ( 113119.60 Hz)
*** ADC events: 38225290 ( 16561.58 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 4817030 old count: 4801683 dt: 315.38 s LEC rate: 15273.57 Hz
*** DSSSD # 2 count: 4859831 old count: 4845346 dt: 315.38 s LEC rate: 15409.28 Hz
*** DSSSD # 3 count: 2756459 old count: 2748047 dt: 315.38 s LEC rate: 8740.03 Hz
*** DSSSD # 4 count: 2366728 old count: 2359885 dt: 315.38 s LEC rate: 7504.29 Hz
*** DSSSD # 5 count: 1834069 old count: 1828597 dt: 315.38 s LEC rate: 5815.36 Hz
*** DSSSD # 6 count: 3545853 old count: 3535021 dt: 315.38 s LEC rate: 11242.99 Hz
*** DSSSD # 1 count: 77 old count: 77 dt: 315.38 s HEC rate: 0.24 Hz
*** DSSSD # 2 count: 72 old count: 72 dt: 315.38 s HEC rate: 0.23 Hz
*** DSSSD # 3 count: 128 old count: 127 dt: 315.38 s HEC rate: 0.41 Hz
*** DSSSD # 4 count: 98 old count: 97 dt: 315.38 s HEC rate: 0.31 Hz
*** DSSSD # 5 count: 66 old count: 66 dt: 315.38 s HEC rate: 0.21 Hz
*** DSSSD # 6 count: 16 old count: 16 dt: 315.38 s HEC rate: 0.05 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Wed Nov 30 20:28:24 2016 |
|
506
|
Wed Nov 30 11:10:10 2016 |
TD | Correlation_Check.c | cd /TapeData/RIBF03R1
~/td/a.out R31 10000 > /tmp/R31.out
~/td/a.out R31 24 > /tmp/R31-2.out
~/td/a.out R42 24 > /tmp/R42.out
[update added 14.00JST Friday 2 December]
aidas1> ~/td/a.out R41 24
Starting Correlation Check Program
Number of SYNCs is 24
File R41_0 opened for read success
Sync Time Incorrect Count=1 ; FullTime=BCF284400A0 ; Last_SyncTime=0
Missing sync_tally = 1 ; paused_modules = 0 ; SYNCs since complete =>
0 => 0 ;1 => 1 ;2 => 1 ;3 => 1 ;4 => 1 ;5 => 1 ;6 => 1 ;7 => 1 ;8 => 1 ;9 => 1 ;10 => 1 ;
11 => 1 ;12 => 1 ;13 => 1 ;14 => 1 ;15 => 1 ;16 => 1 ;17 => 1 ;18 => 1 ;19 => 1 ;20 => 1 ;
21 => 1 ;22 => 1 ;23 => 1 ;24 => 1 ;
Difference Error 1 : ScalarIs 0x29E99A88,Was 0x0, Diff=0x29E99A88 | Now ScalarTime=0xBCF62EBD1C0, Last ScalarTime=0x0,
Diff=0xBCF62EBD1C0 Scalar < Time = 0x0, Last_SyncTime = BCF62E800A0
Scalar gone backwards 2733 : ScalarIs 0x16758F,Was 0x1C3DFAE72, Diff=0xFFFFFFFE3C36C71D | Now ScalarTime=0xBD5CB5DD8E0, Last
ScalarTime=0xBD5CAC42168, Diff=0x99B778 Scalar < Time = 0x0, Last_SyncTime = BD5CB5C00A0
Difference Error 2733 : ScalarIs 0x16758F,Was 0x1C3DFAE72, Diff=0xFFFFFFFE3C36C71D | Now ScalarTime=0xBD5CB5DD8E0, Last
ScalarTime=0xBD5CAC42168, Diff=0x99B778 Scalar < Time = 0x0, Last_SyncTime = BD5CB5C00A0
File R41_1 opened for read success
Scalar gone backwards 4167 : ScalarIs 0x142CEC,Was 0xD7337698, Diff=0xFFFFFFFF28E0B654 | Now ScalarTime=0xBD9286B9480, Last
ScalarTime=0xBD927D1DD04, Diff=0x99B77C Scalar < Time = 0x0, Last_SyncTime = BD9286800A0
Difference Error 4167 : ScalarIs 0x142CEC,Was 0xD7337698, Diff=0xFFFFFFFF28E0B654 | Now ScalarTime=0xBD9286B9480, Last
ScalarTime=0xBD927D1DD04, Diff=0x99B77C Scalar < Time = 0x0, Last_SyncTime = BD9286800A0
File R41_2 opened for read success
File R41_3 opened for read success
File R41_4 opened for read success
File R41_5 opened for read success
File R41_6 opened for read success
File R41_7 opened for read success
File R41_8 opened for read success
File R41_9 opened for read success
File R41_10 opened for read success
File R41_11 opened for read success
File R41_12 opened for read success
File R41_13 opened for read success
File R41_14 opened for read success
File R41_15 opened for read success
File R41_16 opened for read success
File R41_17 opened for read success
File R41_18 opened for read success
File R41_19 opened for read success
File R41_20 opened for read success
File R41_21 opened for read success
File R41_22 opened for read success
File R41_23 opened for read success
File R41_24 opened for read success
File R41_25 opened for read success
File R41_26 opened for read success
File R41_27 opened for read success
File R41_28 opened for read success
File R41_29 opened for read success
File R41_30 opened for read success
File R41_31 opened for read success
File R41_32 opened for read success
File R41_33 opened for read success
File R41_34 opened for read success
File R41_35 opened for read success
File R41_36 opened for read success
File R41_37 opened for read success
File R41_38 opened for read success
File R41_39 opened for read success
File R41_40 opened for read success
File R41_41 opened for read success
File R41_42 opened for read success
File R41_43 opened for read success
File R41_44 opened for read success
File R41_45 opened for read success
File R41_46 opened for read success
File R41_47 opened for read success
File R41_48 opened for read success
File R41_49 opened for read success
File R41_50 opened for read success
File R41_51 opened for read success
File R41_52 opened for read success
File R41_53 opened for read success
File R41_54 opened for read success
File R41_55 opened for read success
File R41_56 opened for read success
File R41_57 opened for read success
Sync Time Incorrect Count=6853176 ; FullTime=D71712400A0 ; Last_SyncTime=D71711C00A0
Missing sync_tally = 1 ; paused_modules = 0 ; SYNCs since complete =>
0 => 0 ;1 => 2 ;2 => 2 ;3 => 2 ;4 => 2 ;5 => 2 ;6 => 2 ;7 => 2 ;8 => 2 ;9 => 2 ;10 => 2 ;
11 => 2 ;12 => 2 ;13 => 2 ;14 => 2 ;15 => 2 ;16 => 2 ;17 => 2 ;18 => 2 ;19 => 2 ;20 => 2 ;
21 => 2 ;22 => 2 ;23 => 2 ;24 => 2 ;
File R41_58 opened for read success
File R41_59 opened for read success
File R41_60 opened for read success
File R41_61 opened for read success
File R41_62 opened for read success
File R41_63 opened for read success
File R41_64 opened for read success
File R41_65 opened for read success
File R41_66 opened for read success
File R41_67 opened for read success
File R41_68 opened for read success
File R41_69 opened for read success
File R41_70 opened for read success
File R41_71 opened for read success
File R41_72 opened for read success
File R41_73 opened for read success
File R41_74 opened for read success
File R41_75 opened for read success
File R41_76 opened for read success
File R41_77 opened for read success
File R41_78 opened for read success
File R41_79 opened for read success
File R41_80 opened for read success
File R41_81 opened for read success
File R41_82 opened for read success
File R41_83 opened for read success
File R41_84 opened for read success
Sync Time Incorrect Count=10082274 ; FullTime=E3687D000A0 ; Last_SyncTime=E3687C800A0
Missing sync_tally = 1 ; paused_modules = 0 ; SYNCs since complete =>
0 => 0 ;1 => 2 ;2 => 2 ;3 => 2 ;4 => 2 ;5 => 2 ;6 => 2 ;7 => 2 ;8 => 2 ;9 => 2 ;10 => 2 ;
11 => 2 ;12 => 2 ;13 => 2 ;14 => 2 ;15 => 2 ;16 => 2 ;17 => 2 ;18 => 2 ;19 => 2 ;20 => 2 ;
21 => 2 ;22 => 2 ;23 => 2 ;24 => 2 ;
File R41_85 opened for read success
File R41_86 opened for read success
File R41_87 opened for read success
File R41_88 opened for read success
File R41_89 opened for read success
File R41_90 opened for read success
File R41_91 opened for read success
File R41_92 opened for read success
File R41_93 opened for read success
File R41_94 opened for read success
File R41_95 opened for read success
File R41_96 opened for read success
File R41_97 opened for read success
File R41_98 opened for read success
File R41_99 opened for read success
File R41_100 opened for read success
File R41_101 opened for read success
File R41_102 opened for read success
File R41_103 opened for read success
File R41_104 opened for read success
File R41_105 opened for read success
File R41_106 opened for read success
File R41_107 opened for read success
File R41_108 opened for read success
File R41_109 opened for read success
File R41_110 opened for read success
File R41_111 opened for read success
File R41_112 opened for read success
File R41_113 opened for read success
File R41_114 opened for read success
File R41_115 opened for read success
File R41_116 opened for read success
File R41_117 opened for read success
Sync Time Incorrect Count=14013263 ; FullTime=F26758800A0 ; Last_SyncTime=F26758000A0
Missing sync_tally = 1 ; paused_modules = 0 ; SYNCs since complete =>
0 => 0 ;1 => 2 ;2 => 2 ;3 => 2 ;4 => 2 ;5 => 2 ;6 => 2 ;7 => 2 ;8 => 2 ;9 => 2 ;10 => 2 ;
11 => 2 ;12 => 2 ;13 => 2 ;14 => 2 ;15 => 2 ;16 => 2 ;17 => 2 ;18 => 2 ;19 => 2 ;20 => 2 ;
21 => 2 ;22 => 2 ;23 => 2 ;24 => 2 ;
File R41_118 opened for read success
File R41_119 opened for read success
File R41_120 opened for read success
File R41_121 opened for read success
File R41_122 opened for read success
File R41_123 opened for read success
File R41_124 opened for read success
File R41_125 opened for read success
File R41_126 opened for read success
File R41_127 open failed |
|
505
|
Wed Nov 30 08:41:37 2016 |
PV, TD, RCF, Liu | Implantation profile in AIDA R39 37 to 46, after changing degrader at 16:23 |
Degrader setting:
Variable degrader:
0.5 mm W + 1 mm Al : in
0.3 mm W + 1 mm Al : in
1 mm W + 1 mm Al : in
Fix degrader:
20mm Al+ 0,2 mm Al
See https://elog.ph.ed.ac.uk/AIDA/502 for comparison |
|
504
|
Wed Nov 30 06:42:01 2016 |
TD | Offline analysis of R39_26 | Following degrader change to (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm/1mm Al + 1mm W/1m Al) variable
S O R T C O M P L E T E ..... Wed Nov 30 17:13:45 2016
*** ENTRY finish
*** data items: 261088000 ( 100256.23 Hz)
*** ADC events: 35996583 ( 13822.47 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5336829 old count: 5326852 dt: 298.81 s LEC rate: 17860.09 Hz
*** DSSSD # 2 count: 4841097 old count: 4831789 dt: 298.81 s LEC rate: 16201.09 Hz
*** DSSSD # 3 count: 3210523 old count: 3204385 dt: 298.81 s LEC rate: 10744.25 Hz
*** DSSSD # 4 count: 2891968 old count: 2886353 dt: 298.81 s LEC rate: 9678.19 Hz
*** DSSSD # 5 count: 1993841 old count: 1989821 dt: 298.81 s LEC rate: 6672.54 Hz
*** DSSSD # 6 count: 3671954 old count: 3664989 dt: 298.81 s LEC rate: 12288.47 Hz
*** DSSSD # 1 count: 66 old count: 66 dt: 298.81 s HEC rate: 0.22 Hz
*** DSSSD # 2 count: 100 old count: 100 dt: 298.81 s HEC rate: 0.33 Hz
*** DSSSD # 3 count: 131 old count: 131 dt: 298.81 s HEC rate: 0.44 Hz
*** DSSSD # 4 count: 79 old count: 79 dt: 298.81 s HEC rate: 0.26 Hz
*** DSSSD # 5 count: 46 old count: 46 dt: 298.81 s HEC rate: 0.15 Hz
*** DSSSD # 6 count: 11 old count: 11 dt: 298.81 s HEC rate: 0.04 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Wed Nov 30 17:15:04 2016 |
|
503
|
Wed Nov 30 06:33:52 2016 |
TD | Offline analysis R36_30 |
Following target change from (CH2)n to C
Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 1mm W/1m Al) variable
See https://elog.ph.ed.ac.uk/AIDA/499
S O R T C O M P L E T E ..... Wed Nov 30 15:27:25 2016
*** ENTRY finish
*** data items: 261088000 ( 116005.27 Hz)
*** ADC events: 36396496 ( 16171.50 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5261837 old count: 5244729 dt: 302.14 s LEC rate: 17415.17 Hz
*** DSSSD # 2 count: 4766457 old count: 4750965 dt: 302.14 s LEC rate: 15775.61 Hz
*** DSSSD # 3 count: 2750220 old count: 2741230 dt: 302.14 s LEC rate: 9102.44 Hz
*** DSSSD # 4 count: 2371078 old count: 2363331 dt: 302.14 s LEC rate: 7847.59 Hz
*** DSSSD # 5 count: 1938346 old count: 1932204 dt: 302.14 s LEC rate: 6415.37 Hz
*** DSSSD # 6 count: 3579949 old count: 3568500 dt: 302.14 s LEC rate: 11848.61 Hz
*** DSSSD # 1 count: 18 old count: 18 dt: 302.14 s HEC rate: 0.06 Hz
*** DSSSD # 2 count: 1 old count: 1 dt: 302.14 s HEC rate: 0.00 Hz
*** DSSSD # 3 count: 13 old count: 13 dt: 302.14 s HEC rate: 0.04 Hz
*** DSSSD # 4 count: 37 old count: 37 dt: 302.14 s HEC rate: 0.12 Hz
*** DSSSD # 5 count: 110 old count: 110 dt: 302.14 s HEC rate: 0.36 Hz
*** DSSSD # 6 count: 144 old count: 144 dt: 302.14 s HEC rate: 0.48 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Wed Nov 30 15:28:35 2016 |
|
502
|
Wed Nov 30 06:31:04 2016 |
PV, TD, RCF, Liu | Implantation profile in AIDA R39 2 to 9, after changing degrader at 13:30 | Degrader setting was:
Variable degrader:
0.5 mm W + 1 mm Al : in
0.3 mm W + 1 mm Al : out
1 mm W + 1 mm Al : in
Fix degrader:
20mm Al+ 0,2 mm Al
Large portion of the beam is passing through AIDA! We need to change the degrader |
|
501
|
Wed Nov 30 05:30:20 2016 |
TD | Offline analysis R39_6 |
Degrader 8mm Al fixed + ( 0.5mm W/1mm Al + 1mm W/1mm Al) variable
S O R T C O M P L E T E ..... Wed Nov 30 14:41:39 2016
*** ENTRY finish
*** data items: 261088000 ( 107267.57 Hz)
*** ADC events: 36298818 ( 14913.31 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5026250 old count: 5011592 dt: 301.12 s LEC rate: 16691.77 Hz
*** DSSSD # 2 count: 4868135 old count: 4854528 dt: 301.12 s LEC rate: 16166.68 Hz
*** DSSSD # 3 count: 3233592 old count: 3224663 dt: 301.12 s LEC rate: 10738.50 Hz
*** DSSSD # 4 count: 2914929 old count: 2906700 dt: 301.12 s LEC rate: 9680.24 Hz
*** DSSSD # 5 count: 2009399 old count: 2003732 dt: 301.12 s LEC rate: 6673.05 Hz
*** DSSSD # 6 count: 3695168 old count: 3684926 dt: 301.12 s LEC rate: 12271.36 Hz
*** DSSSD # 1 count: 24 old count: 24 dt: 301.12 s HEC rate: 0.08 Hz
*** DSSSD # 2 count: 12 old count: 12 dt: 301.12 s HEC rate: 0.04 Hz
*** DSSSD # 3 count: 39 old count: 39 dt: 301.12 s HEC rate: 0.13 Hz
*** DSSSD # 4 count: 94 old count: 94 dt: 301.12 s HEC rate: 0.31 Hz
*** DSSSD # 5 count: 152 old count: 152 dt: 301.12 s HEC rate: 0.50 Hz
*** DSSSD # 6 count: 131 old count: 131 dt: 301.12 s HEC rate: 0.44 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Wed Nov 30 14:42:53 2016 |
|
500
|
Wed Nov 30 04:56:40 2016 |
TD | Offline analysis R38_33 |
Degrader 8mm Al fixed + ( 0.3mm W/1mm Al + 1mm W/1mm Al) variable
ADC & disc data synchronised
S O R T C O M P L E T E ..... Wed Nov 30 13:53:38 2016
*** ENTRY finish
*** data items: 261088000 ( 95225.14 Hz)
*** ADC events: 44184529 ( 16115.17 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5050939 old count: 5048005 dt: 362.93 s LEC rate: 13917.19 Hz
*** DSSSD # 2 count: 5030612 old count: 5028047 dt: 362.93 s LEC rate: 13861.19 Hz
*** DSSSD # 3 count: 2817584 old count: 2815988 dt: 362.93 s LEC rate: 7763.48 Hz
*** DSSSD # 4 count: 2482552 old count: 2481283 dt: 362.93 s LEC rate: 6840.34 Hz
*** DSSSD # 5 count: 1549349 old count: 1548540 dt: 362.93 s LEC rate: 4269.03 Hz
*** DSSSD # 6 count: 3960450 old count: 3958332 dt: 362.93 s LEC rate: 10912.50 Hz
*** DSSSD # 1 count: 18 old count: 18 dt: 362.93 s HEC rate: 0.05 Hz
*** DSSSD # 2 count: 6 old count: 6 dt: 362.93 s HEC rate: 0.02 Hz
*** DSSSD # 3 count: 21 old count: 20 dt: 362.93 s HEC rate: 0.06 Hz
*** DSSSD # 4 count: 64 old count: 63 dt: 362.93 s HEC rate: 0.18 Hz
*** DSSSD # 5 count: 157 old count: 157 dt: 362.93 s HEC rate: 0.43 Hz
*** DSSSD # 6 count: 200 old count: 200 dt: 362.93 s HEC rate: 0.55 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Wed Nov 30 13:55:06 2016 |
|
499
|
Tue Nov 29 19:07:35 2016 |
AE, CG, ATS, AT | F11 conditions after change to C target in F8 [light particles?] | The main experiment changed to a carbon reaction target at F8 (similar thickness of CH2 previously used), and retuned the ZDS. First BigRIPS run after retuning is 40Mg_1093 (at 2:29 am, Nov 30th)
The background at F11 has increased. The neutron backgroun incresead by a factor of ~10. The rates of visual scalers also increased; for example Si Top/Bottom from about 50 Hz to 300 Hz (see attachment 1).
One possible explanation are higher light particle rate at F11. By comparing the PID for C target (attachment 2) with that of CH2 target setting (e.g. https://elog.ph.ed.ac.uk/AIDA/492), it looks like the new conditions have a higher transmission for A/Q=3 fragments (3H et al). Also, in the new setting the Si isotopes are also transmitted to F11.
The implantation depth is still good; same as we had for C target at F8 (compare 40Al distribution in attachment 3 with what we had before). |
|
498
|
Tue Nov 29 15:12:33 2016 |
CG, AE, TD, DK | Wednesday 30 November | 00.11 Beam stopped for target @F8 change.
R35 stopped at R35_62.
BRIKEN file 161129_1951 155->159
BigRIPS files 1084-1088.
Bias and leakage currents ok (attachments 1+2).
00:38 Added 0.2 mm Al fixed degrader. The new target at F8 is 0.9 g/cm2 C, which (according to LISE calculation)
results in 2.7 MeV/u less energy loss than the previous 0.9 g/cm2 CH2 target.
00:42 Beam returned. R36 started. BigRIPS file 1089.
Initially out of sync with BRIKEN so reset correlation timestamp @ 01:45 (~1/2 way through R36_0).
02:26 Beam rate at F11 about doubled. Now ~80cps @ F11.
Previously changing beam spot position, but now 41Al now centred.
02:39 Beam stopped start @ of R36_11.
03.33 Beam returned to F11, centred on 40Mg in ZDS.
Just after start of R36_22.
BigRIPS file 1094.
04.35 Beam stopped. ~1/2 way through R36_34.
Continue running with R36.
06.13 R36 stopped.
The control module of a power supply of one of the STQs has broken and the accelerator team must contact the
manufacturer to work out a solution.
This will take some time (hours or maybe even into tomorrow).
09.36 STQ PSU fixed - beam returns
BigRIPS data file 1096
10.00 AIDA DAQ soft reset to recover from LN2 fill cycle transient
10.03 DAQ starts (RIBF03R1/R38)
ASIC settings 2016Nov29-21.38.02
Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 1mm W/1m Al) variable
10.38 BigRIPS data file 1097
10.50 Unable to sync DAQs - appears BRIKEN timestamp is not being reset, AIDA-RIBFDAQ appear to be sync'd
11.16 Looks like BRIKEN gets the sync again. It's some kind of integer overflow issue?! Unclear.
BRIKEN starts the new run. It is the same time as AIDA R38_14 (about 400 MB into file)
11.43 BigRIPS data file 1098
12.47 BigRIPS data file 1099
13.02 DSSSD bias & leakage currents OK - see attachments 3 & 4
FEE64 temperatures OK - see attachment 5
Visual scalers - see attachment 6
Good events and Merge statistics - see attachments 7-12
All FEE64s << 100 k data items/s
Offline analysis of R38_34 shows most events are in DSSSDs #5 & #6
13.20 DAQ stopped OK (RIBF0R1/R38_35)
Change degrader to (8mm Al) fixed + ( 0.5mm W/1mm Al + 1mm W/1m Al) variable, i.e. additional 0.2mm W
13.21 DAQ starts (RIBF0R1/R39)
BRIKEN DAQ issues three re-syncs
SyncCheck OK
13.32 AIDA data file R39_2
BRIKEN data file 175
ASIC settings 2016Nov29-21.38.02
Degrader (8mm Al) fixed + ( 0.5mm W/1mm Al + 1mm W/1m Al) variable
B-rho changed from 6.384Tm to 6.673Tm overnight => 9.3% energy change
A=40 ions at F11 change from 145MeV/u to 158MeV/u
14.22 Beam was off to change stripper foil. Now it is back at F11, around 10 cps at the scint (BigRIPS scaler) or
60 cps at our normal F11 plastic
Very nearly the time of R39_12 beginning.
BigRIPS run 1101
15.25 Offline analysis indicates we need to increase degrader thickness further
Will add 0.5mm W/1mm Al to change degrader to (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm /1mm Al + 1mm W/1mm Al
) variable
15.30 DAQ continues (RIBF03R1/R39_25)
BRIKEN data file 178
16.06 BigRIPS data file 1103
16.23 We observed that the degrader was not actually inserted previously as we thought.
Now it is inserted, so variable degraders 1, 2 and 3: 0.5 mm W (+1 mm Al), 0.3 mm W (+1 mm Al) and 1.0 mm W (+1
mm Al)
AIDA run is R39_36
17.04 BigRIPS data file 1104
17.53 System-wide checks OK *except* variable # of nnaida5, 7, 8 , 15 & 16 fail clock status - bit 2 always set
18.06 BigRIPS data file 1105
18.21 DAQ stops OK (RIBF03R1/R39_60) in advance of Clover LN2 refill cycle
19.08 BigRIPS data file 1106
19.29 DAQ starts (RIBF03R1/R41_0)
Steering to F11 changed by PD - attempt to centre implants in DSSSDs
19.30 BigRIPS data file 1107
19.42 AIDA data file R41_2
BRIKEN data file 183
ASIC settings 2016Nov29-21.38.02
Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 0.5mm W/1mm Al + 1mm W/1m Al) variable
20.00 Visual scalers - see attachment 13
20.27 BigRIPS data file 1108
21.26 Beam lost
21.43 Beam back
BigRIPS data file 1109
AIDA data file R41_26
BRIKEN data file 183
22.47 BigRIPS data file 1110.
23.47 BigRIPS data file 1111. |
|
497
|
Tue Nov 29 12:21:35 2016 |
TD | Offline analysis R35_1 |
S O R T C O M P L E T E ..... Tue Nov 29 20:45:36 2016
*** ENTRY finish
*** data items: 261088000 ( 86387.95 Hz)
*** ADC events: 35941414 ( 11892.18 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5276204 old count: 5262371 dt: 300.27 s LEC rate: 17571.70 Hz
*** DSSSD # 2 count: 4680694 old count: 4668369 dt: 300.27 s LEC rate: 15588.43 Hz
*** DSSSD # 3 count: 2774752 old count: 2767324 dt: 300.27 s LEC rate: 9240.95 Hz
*** DSSSD # 4 count: 2405451 old count: 2399010 dt: 300.27 s LEC rate: 8011.04 Hz
*** DSSSD # 5 count: 1940411 old count: 1935190 dt: 300.27 s LEC rate: 6462.28 Hz
*** DSSSD # 6 count: 3578504 old count: 3569034 dt: 300.27 s LEC rate: 11917.74 Hz
*** DSSSD # 1 count: 54 old count: 54 dt: 300.27 s HEC rate: 0.18 Hz
*** DSSSD # 2 count: 76 old count: 76 dt: 300.27 s HEC rate: 0.25 Hz
*** DSSSD # 3 count: 124 old count: 124 dt: 300.27 s HEC rate: 0.41 Hz
*** DSSSD # 4 count: 129 old count: 129 dt: 300.27 s HEC rate: 0.43 Hz
*** DSSSD # 5 count: 84 old count: 84 dt: 300.27 s HEC rate: 0.28 Hz
*** DSSSD # 6 count: 33 old count: 33 dt: 300.27 s HEC rate: 0.11 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Tue Nov 29 20:47:11 2016 |
|
496
|
Tue Nov 29 05:18:50 2016 |
TD | Offline analysis of R31 | Offline analysis of AIDA data files from R31_0 to c. R31_5 (elapsed time 1120.45s)
Note impact of increased noise ( https://elog.ph.ed.ac.uk/AIDA/494 )on LEC spectra,
particularly for DSSSDs #1 & #2.
*** ENTRY finish
*** data items: 1231535778 ( 133914.33 Hz)
*** ADC events: 112061604 ( 12185.32 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 24147717 old count: 24147349 dt: 1120.45 s LEC rate: 21551.85 Hz
*** DSSSD # 2 count: 22686292 old count: 22685929 dt: 1120.45 s LEC rate: 20247.53 Hz
*** DSSSD # 3 count: 13051178 old count: 13050922 dt: 1120.45 s LEC rate: 11648.18 Hz
*** DSSSD # 4 count: 11173273 old count: 11173038 dt: 1120.45 s LEC rate: 9972.15 Hz
*** DSSSD # 5 count: 9478275 old count: 9478090 dt: 1120.45 s LEC rate: 8459.36 Hz
*** DSSSD # 6 count: 15562532 old count: 15562263 dt: 1120.45 s LEC rate: 13889.57 Hz
*** DSSSD # 1 count: 165 old count: 165 dt: 1120.45 s HEC rate: 0.15 Hz
*** DSSSD # 2 count: 275 old count: 275 dt: 1120.45 s HEC rate: 0.25 Hz
*** DSSSD # 3 count: 523 old count: 523 dt: 1120.45 s HEC rate: 0.47 Hz
*** DSSSD # 4 count: 469 old count: 469 dt: 1120.45 s HEC rate: 0.42 Hz
*** DSSSD # 5 count: 297 old count: 297 dt: 1120.45 s HEC rate: 0.27 Hz
*** DSSSD # 6 count: 118 old count: 118 dt: 1120.45 s HEC rate: 0.11 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Tue Nov 29 14:18:07 2016
Spectrum s400 displays the frequency of bits 0-47 of the (MBS) 25MHz correlation scaler.
For those bits which can be expected to cycle often within the sampling period we would
expect to observe each bit with equal probability and this is observed for bits 0-31.
Conclude there is no evidence for hardware/firmware problems with the AIDA 25MHz correlation
clock for bits 0-31 and therefore probably not for bits 32-47 either.
I think the SyncCheck issues observed could due to:
1) the effect of sampling data from the AIDA TapeServer data buffers,
2) arithmetic/coding bug in the SyncCheck code
... or ?
I don't recall observing these issues before ... does that mean we weren't looking? ... or
that there has been some change to hardware operation, software ... ?
|
|
494
|
Mon Nov 28 18:07:14 2016 |
CG, TD, AE, DK | Tuesday 29 November | 01:39 : Attachment 26 (R30_70to72) shows a gradual change in the hit pattern for DSSD2 (at the lower left
corner) which may indicate the noise level was increasing.
02.23 BigRIPS data file 1066
03.05 Beam stopped due to problem with LINAC RF.
Stopped at 1GB through R30_90.
Bias and leakage currents ok (attachments 1+2). Temps ok (attachment 3).
03.15 R30 stopped.
03.22 BigRIPS data file 1067
03.24 Beam returned and R31 started.
04.25 BigRIPS data file 1068
05.29 BigRIPS data file 1069
06.26 Stop R31 in anticipation of LN2 fill.
Run stopped at R31_56.
06.31 BigRIPS data file 1070
07.18 R32 started successfully after LN2 fill.
07.24 DAQ crashed. SYNC errors.
R32 closed.
Cannot soft reset. Unable to contact nnaida9+19.
07.33 BigRIPS data file 1071
07.49 R33 started after FEE power cycle.
Running quite fast, but seems to be stable. F11 rate still 30cps.
08.26 /home full.
aidas1> du -sh /home/data/
811G /home/data/
aidas1> du -sh /home/data/*
3.4M /home/data/bkg_r97.root
253G /home/data/NP1306.rootfiles
27G /home/data/NP1512.rootfiles
190G /home/data/npg
311G /home/data/online
2.0G /home/data/R97_0
2.0G /home/data/R97_1
2.0G /home/data/R97_10
2.0G /home/data/R97_11
1.8G /home/data/R97_12
2.0G /home/data/R97_2
2.0G /home/data/R97_3
2.0G /home/data/R97_4
2.0G /home/data/R97_5
2.0G /home/data/R97_6
2.0G /home/data/R97_7
2.0G /home/data/R97_8
2.0G /home/data/R97_9
7.4G /home/data/rootFiles
4.0K /home/data/rsync.sh
4.0K /home/data/rsync.sh~
4.0K /home/data/ttt.txt
08.36 BigRIPS data file 1072
09.16 Beam stopped for stripper foil change.
R33 stopped.
GK, RG and SN will install repaired clover (G7).
09.28 Beam returned and R34 started.
BigRIPS data file 1073
10.32 BigRIPS data file 1074
11.00 DSSSD bias & leakage currents OK - see attachments 4 & 5
FEE64 temperatures OK - see attachment 6
Merge statistics OK - see attachments 7-12
System wide checks OK *except* fails for clock status (bit 2 always set) and ADC calibration - see
attachments 13-14
11.20 Visual scaler - see attachment 15
11.25 Analysis of R30_25 - see attachment 16
11.39 BigRIPS data file 1075
13.11 BigRIPS data file 1076
14.10 11.50-14.10 Spectra Rate, HitRate, 1.8.L, 1.8.H, 1.8.W - see attachments 17-24
1.8.W spectra show some evidence of increased 100kHz noise for nnaida17, 18 & 19
statistics good events - nnaida17, 18 & 19 > 100k data item/s - see attachment 25
14.16 BigRIPS data file 1077
14.54 BigRIPS data file 1078
15.19 BigRIPS data file 1079
16.14 BigRIPS data file 1080
16.16 BigRIPS data file 1081
17.17 BigRIPS data file 1082
18.18 BigRIPS data file 1083
19.03 BigRIPS data file 1084
18.26 DAQ stopped OK (RIBF03R1/R34_137)
Clover HPGe LN2 refill
18.30 Beam off - for primary user calibration & stripper foil change
18.45 Ambient temperature +25.5 deg C, d.p. -5.0 deg C, RH 12.%
DSSSD bias & leakage currents OK - see attachments 27 & 28
FEE64 temperatures OK - see attachment 29
19.03 BigRIPS data file 1084
19.12 Statistics good events - see attachment 30
All FEE64s < 100k data items/s, nnaida17, 18 & 19 < 50k data items/s
Note - nothing has been changed/touched
19.40 Degraders unchanged
(8mm Al) Fixed + ( 1mm W/1mm Al, 0.3mm W/1mm Al) variable
19.46 DAQ starts (RIBF0R1/R35)
19.50 SyncCheck OK
19.51 BRIKEN data file 155
19.53 Statistics - good events - see attachment 31
All FEE64s < 100k data items/s, nnaida17, 18 & 19 < 50k data items/s
Visual scalers - see attachment 32
20.00 BigRIPS data file 1085
20.08 Offline analysis R35_1 - ADc & disc data synchronised - see attachments 33 & 34
20.58 BigRIPS data file 1086
21.15 Rate, HitRate, 1.8.L, 1.8.H, 1.8.W spectra - see attachments 35-42
21.35 Found nnaida17 HEC fast comparator 0x3 *not* 0x2
Corrected and saved ASIC settings etc with new DB key 2016Nov29-21.38.02
Current AIDA data file R35_22
|
|
493
|
Mon Nov 28 15:53:39 2016 |
AE, AT, RG, CG | DAQ synchronization | We noticed a peculiar feature in the time-stamp synchronization monitor. The spectra of timestamp difference between pairs of DAQ systems show, for all possible pair combinations, a peak at Delta(ts)= 65535 = 2**15
This corresponds to a difference of 2.6 ms (for 25MHz correlation clock). See the attachments taken ~23:00 of Nov 28th.
We performed the AIDA system-wide checks (no errors) and a timestamp reset, but the second peak at 65K is still there (we also checked that there is no peak at 2*65K, at least in a short run period).
We also observed a double peak for timestam-differences close to zero, which we interpret as good correlations (attachment 2). Note, however, that this double peak became much supprese around midnight (see attachment 6 and 7).
From analysis of ion (BigRIPS) and implant (AIDA) correlations we have some confidence that these two DAQs are synchronized; see entry https://elog.ph.ed.ac.uk/AIDA/492 where we identify an implant for 20% ofions at F11 (and with an implantatin profile that, for example, is consistent with changes to the degrader configuration)
|
|
492
|
Mon Nov 28 13:12:31 2016 |
PV, AE, Liu | Implantation profile in AIDA with 8mm Al replacing 3 mm Pb | Data for ~3 hrs: Nov 28th, 20:06 to 23:16
Bigrips run 1060 to 1062
AIDA run R30_ 2 to R30_40
Degrader setting: variable= (0.3mmW/1mmAl + 1mmW/1mmAl) + fixed= ( 8 mm Al)
IMPLANT PROFILE: Compare to previous setting (with 3mm Pb as fixed degrader) in elog entry https://elog.ph.ed.ac.uk/AIDA/487
In particular, attachment: https://elog.ph.ed.ac.uk/AIDA/161127_195411/run104x_imp_profile.png
The implantation positin for 40Mg seems to be well optimized (perhaps we can add ~0.5 mm Al to move it further downstream, but not more than that!).
IMPLANT EFFICIENCY: If we compare the number of Al and Mg ions in the ZDS PID for the three runs (~46000, see attachment 5) to the number of ions identified as implants (9389, see attachment 2), we get:
Implant efficiency ~ 20 % (=9389/46000)
P/S: attachment: hit pattern in BRIKEN with F11 plastic (beam), only for BigRIPS run 40Mg1060
|
|
491
|
Mon Nov 28 11:55:20 2016 |
TD | Offline analysis R30_2 | Degrader (8mm Al) fixed + ( 0.3mm W/1mm Al + 1mm W/1mm Al)
S O R T C O M P L E T E ..... Mon Nov 28 20:53:02 2016
*** ENTRY finish
*** data items: 261088000 ( 120002.96 Hz)
*** ADC events: 34802098 ( 15995.96 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5905997 old count: 5887846 dt: 290.51 s LEC rate: 20329.92 Hz
*** DSSSD # 2 count: 5530448 old count: 5513790 dt: 290.51 s LEC rate: 19037.19 Hz
*** DSSSD # 3 count: 2899015 old count: 2890171 dt: 290.51 s LEC rate: 9979.14 Hz
*** DSSSD # 4 count: 2612137 old count: 2604306 dt: 290.51 s LEC rate: 8991.63 Hz
*** DSSSD # 5 count: 1944405 old count: 1938459 dt: 290.51 s LEC rate: 6693.13 Hz
*** DSSSD # 6 count: 3424115 old count: 3413635 dt: 290.51 s LEC rate: 11786.66 Hz
*** DSSSD # 1 count: 52 old count: 52 dt: 290.51 s HEC rate: 0.18 Hz
*** DSSSD # 2 count: 78 old count: 78 dt: 290.51 s HEC rate: 0.27 Hz
*** DSSSD # 3 count: 147 old count: 147 dt: 290.51 s HEC rate: 0.51 Hz
*** DSSSD # 4 count: 130 old count: 130 dt: 290.51 s HEC rate: 0.45 Hz
*** DSSSD # 5 count: 84 old count: 84 dt: 290.51 s HEC rate: 0.29 Hz
*** DSSSD # 6 count: 40 old count: 40 dt: 290.51 s HEC rate: 0.14 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Mon Nov 28 20:54:07 2016 |
|
490
|
Mon Nov 28 06:49:04 2016 |
DK | Offline analysis R27_1 | Conditions: One Pb wall with empty windows. 3mm Pb degrader closer to AIDA, on the front of PE wall
Variable degraders: 1.0 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)
*** data items: 261088000 ( 110875.14 Hz)
*** ADC events: 39427988 ( 16743.72 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 5617273 old count: 5603383 dt: 327.21 s LEC rate: 17167.27 Hz
*** DSSSD # 2 count: 6007495 old count: 5992656 dt: 327.21 s LEC rate: 18359.85 Hz
*** DSSSD # 3 count: 3154280 old count: 3146595 dt: 327.21 s LEC rate: 9639.98 Hz
*** DSSSD # 4 count: 2713744 old count: 2706934 dt: 327.21 s LEC rate: 8293.63 Hz
*** DSSSD # 5 count: 1977642 old count: 1972985 dt: 327.21 s LEC rate: 6043.99 Hz
*** DSSSD # 6 count: 2943065 old count: 2935788 dt: 327.21 s LEC rate: 8994.47 Hz
*** DSSSD # 1 count: 128 old count: 128 dt: 327.21 s HEC rate: 0.39 Hz
*** DSSSD # 2 count: 174 old count: 174 dt: 327.21 s HEC rate: 0.53 Hz
*** DSSSD # 3 count: 236 old count: 236 dt: 327.21 s HEC rate: 0.72 Hz
*** DSSSD # 4 count: 158 old count: 158 dt: 327.21 s HEC rate: 0.48 Hz
*** DSSSD # 5 count: 80 old count: 80 dt: 327.21 s HEC rate: 0.24 Hz
*** DSSSD # 6 count: 29 old count: 29 dt: 327.21 s HEC rate: 0.09 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Mon Nov 28 15:32:15 2016
See attached histograms |
|
489
|
Mon Nov 28 05:38:39 2016 |
DK | Offline analysis R28_14 | Conditions: Two Pb walls with empty windows. 3mm Pb degrader between MUSIC 1 and MUSIC 2.
Variable degraders: 1.0 mm W (+1 mm Al) and 0.3 mm W (+1 mm Al)
*** DSSSD # 1 count: 5901917 old count: 5892055 dt: 286.62 s LEC rate: 20591.57 Hz
*** DSSSD # 2 count: 5564387 old count: 5555277 dt: 286.62 s LEC rate: 19413.94 Hz
*** DSSSD # 3 count: 2995556 old count: 2990474 dt: 286.62 s LEC rate: 10451.38 Hz
*** DSSSD # 4 count: 2453137 old count: 2448680 dt: 286.62 s LEC rate: 8558.90 Hz
*** DSSSD # 5 count: 1926370 old count: 1923142 dt: 286.62 s LEC rate: 6721.03 Hz
*** DSSSD # 6 count: 3550119 old count: 3544196 dt: 286.62 s LEC rate: 12386.23 Hz
*** DSSSD # 1 count: 76 old count: 76 dt: 286.62 s HEC rate: 0.27 Hz
*** DSSSD # 2 count: 94 old count: 94 dt: 286.62 s HEC rate: 0.33 Hz
*** DSSSD # 3 count: 118 old count: 118 dt: 286.62 s HEC rate: 0.41 Hz
*** DSSSD # 4 count: 74 old count: 74 dt: 286.62 s HEC rate: 0.26 Hz
*** DSSSD # 5 count: 48 old count: 48 dt: 286.62 s HEC rate: 0.17 Hz
*** DSSSD # 6 count: 17 old count: 17 dt: 286.62 s HEC rate: 0.06 Hz
*** ENTRY finish ends
S O R T S T O P P E D ..... Mon Nov 28 14:20:29 2016
See attached histograms |
|