| ID |
Date |
Author |
Subject |
|
777
|
Mon Nov 12 14:51:44 2018 |
OH | Tuesday 13 November 00:00 - 08:00 | 00:00 AIDA currently on file R5_38
BRIKEN on file 181112_2321_165Pm_019.dlt (AIDA file at start R5_33)
BigRIPS run 1004
00:23 BRIKEN stop file
AIDA Currently on file R5_43
00:26 BRIKEN start 181113_0025_165Pm_020.dlt
BigRIIPS start 1005
AIDA Currently on file R5_43
System wide checks ok
01:13 Bias and leakage currents ok - attchment 1
Stats ok - attachment 2
FEE Temps ok - attachment 3
01:21 BigRIPS and BRIKEN stop
AIDA on file R5_52
01:25 BigRIPS starts run 1006
BRIKEN starts run 181113_0123_165Pm_021.dlt
AIDA on file R5_53
02:21 BigRIPS and BRIKEN stop
AIDA on file R5_62
02:23 BigRIPS starts run 1007
BRIKEN starts run 181113_0222_165Pm_022.dlt
AIDA on file R5_62
ASIC load check ok
03:15 Beam dropped out unsure for how long but is now back
03:21 BigRIPS and BRIKEN stopped
AiDA on file R5_71
03:23 BigRIPS starts run 1008
BRIKEN starts run 181113_0320_165Pm_023.dlt
AIDA on file R5_71
03:45 Output of analyser on R5_70 - attachment 4
03:59 System wide checks ok
FEE Temps ok - attachment 5
Statistics ok - attachment 6
04:21 BigRIPS and BRIKEN stop
AIDA on file R5_81
04:23 BigRIPS starts run 1009
BRIKEN starts run 181113_0421_165Pm_024.dlt
AIdA on file R5_81
05:19 BigRIPS and BRIKEN stop
AIDA on file R5_90
05:20 BigRIPS start run 1010
BRIKEN starts run 181113_0520_165Pm_025.dlt
AIDA on file R5_90
05:49 System wide checks all ok
Stats ok - attachment 7
FEE Temps ok - attchment 8
Bias and leakage currents ok - attachment 9
High energy hit pattern per dssd - attachment 10
Low energy Ex vs Ey plot per dssd - attachment 11
High energy Ex vs Ey plot per dssd - attachment 12
Also using the previously merged files produced from Phong's sort have confirmed that there is no to
little punch through on DSSD3
Did this through the use of a 2d plot of energy DSSD 3 vs the velocity
06:21 BigRIPS and BRIKEN stop
AIDA on file R5_100
06:23 BigRIPS starts run 1011
BRIKEN starts run 181113_0622_165Pm_026.dlt
AIDA on file R5_100
07:19 BigRIPS and BRIKEN stop
AIDA on file R5_110
07:20 BigRIPS starts run 1012
BRIKEN starts run
AIDA on file R5_110 |
|
786
|
Thu Nov 15 06:52:09 2018 |
OH | Thursday 15th November 16:00 - 24:00 | 15:51 DAQ continues - AIDA file RIBF148/R5_664
165Pm BigRIPS setting + 2.8mm Al degrader
ASIC settings 2018Oct03-13.26.58
from c. 09.00 13.11.18
n+n FEE64s Ibias LF feedback 0xb -> 0xd
HEC fast comparator threshold 0x20 -> 0xff
15:52 Beam out due to power fault somewhere.
15:53 Beam back
BRIKEN and BigRIPS start
BRIKEN file 181115_1553_165Pm_085.dlt
BigRIPS run 1070
AIDA on run R5_664
16:00 System wide checks all ok *Except nnaida7 fails adc calibration*
Leakage currents and bias ok - attachment 1
FEE Temps ok - attachment 2
Statistics ok - attachment 3
16:54 BRIKEN and BigRIPS stop
AIDA on file R5_675
16:55 BRIKEN starts run 181115_1654_165Pm_086.dlt
BigRIPS starts run 1071
AIDA on file R5_675
17:30 BRIKEBN and BigRIPS stop for BigRIPS team to get access
13:46 BRIKEN sends sync pulse resetting timestamp
AIDA on file R5_683
17:49 BRIKEN starts run 181115_1748_165Pm_087.dlt
bigRIPS starts run 1072
AIDA on file R5_683
18.00 System wide checks ok, except nnaida7 ADC calibration failure
FEE64 Temperatures ok (attachment 4)
Good event statistics ok (attachment 5)
Detector bias/Leakage currents ok (attachment 6)
18.04 Merger and TapeServer run ok - no error messages in terminals (attachments 7 and 8)
18:48 BigRIPS and BRIKEN stop
AIDA on file R5_693
18:49 BigRIPS starts run 1073
BRIKEN starts run 181115_1849_165Pm_088.dlt
AIDA on file R5_693
19:47 BgiRIPS and BRIKEN stop
AIDA on file R5_703
19:48 BigRIPS starts run 1074
BRIKEN starts run 181115_1947_165Pm_089.dlt
AIDA on file R5_703
20:54 bigRIPS and BRIKEN stop
AIDA on file R5_714
20:55 bigRIPS starts run 1075
BRIKEN starts run 181115_2053_165Pm_090.dlt
AIDA on file R5_714
21:25 System wide checks all ok *Except nnaida 7 fails adc calibration*
Bias and leakage currents ok - attachment 9
FEE Temps all ok - attachment 10
Statistics ok - attachment 11
21:55 BRIKEN and BigRIPS stop
AIDA on file R5_724
21:56 BigRIPS starts on run 1076
BRIKEN starts run
AIDA on file R5_724
22:55 BigRIPS and BRIKEN stop
AIDA on file R5_733
22:56 BRIKEN Starts run
BigRIPS starts run 1077
AIDA on file R5_733
23.53 Briken stops
AIDA on file R5_743
23.55 BRIKEN starts
bigRIPS run 1078
BRIKEN starts run 93
AIDA on file R5_743 |
|
792
|
Tue Mar 26 14:02:59 2019 |
OH | Inventory to be shipped back | Inventory is currently packaged up under the AIDA desk in B3F
2 FEE64 Modules
Module 1 - MAC Addresses
2B:33:15
2B:22:6E <- Loose HDMI
Module 2 - MAC Addresses
2B:09:DA <- ASIC #1 HEC Hot Channel, LEC noisy
2B:11:C5 <- Missing ASIC
MACB A-MP 202394 -2 72-38
MACB RevB Ser38 AMP 202394-2
MACB RevB AMP 202394-2 81-49 |
|
641
|
Wed Jun 7 00:10:24 2017 |
NN, TD | Wednesday 7 June 08:00 - 16:00 | 08:12 Analysis of file RIBF128/R6_438 - zero timewarps, four MBS timewarps - see attachment 1
08:23 Online analysis (per DSSSD rates) of R6_443, see attachment 2
08:35 BigRIPS and BRIKEN stop their DAQ
AIDA run file R6_446
08:40 BRIKEN starts run 043
BigRIPS starts run 3040
AIDA on file R6_448
09:16 *All* system wide checks OK
FEE64 Temperatures OK - see attachment 3
Good events statistics OK - see attachment 4
Detector biases & leakage currents OK - see attachment 5
Merger and tape server running - see attachment 6,7
09:51 Beam is OFF, RC is down
09:53 BigRIPS and BRIKEN stop their DAQ
AIDA run file R6_470
10:00 Beam is ON
10:01 BRIKEN starts run 044
BigRIPS starts run 3041
AIDA on file R6_472
10:07 AIDA DAQ crashed (fuse blown)
AIDA on file R6_474
10:14 BigRIPS and BRIKEN stop their QAD
AIDA on file R6_474
10:25 E17/F11 ambient temperature +24.3 deg C, RH 42.7%, d.p. +10.9 deg C
Julabo FL11006 set point +20 deg C, actual +20.0 deg C, water level OK (c. 75%)
BNC PB-4 analogue output BNC T replaced by BNC-Lemo00 adaptor and Lemo00 T
11:08 AIDA DAQ running (recovered)
11:10 BRIKEN starts run 045
BigRIPS starts run 3043
AIDA on file R7_1
(BigRIPS run 3042 was used to check synchronization)
11:21 *All* system wide checks OK
FEE64 Temperatures OK - see attachment 8
Good events statistics OK - see attachment 9
Detector biases & leakage currents OK - see attachment 10
Merger and tape server running - see attachment 11,12
11:28 Analysis of file RIBF128/R7_4 - zero timewarps, two MBS timewarps - see attachment 13
12:13 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_16
12:13 BRIKEN starts run 046
BigRIPS starts run 3044
AIDA on file R7_17
12:21 Analysis of file RIBF128/R7_15 - zero timewarps, two MBS timewarps - see attachment 14
12:23 High Energy Correlation spectra - see attachment 15
AIDA on file R7_20
13.00 Detector biases & leakage currents OK - see attachments 16 & 17
FEE64 Temperatures OK - see attachment 18
good events statistics OK - see attachment 19
No warnings/errors reported by merger since DAQ GO - see attachment 20
*all* system wide checks OK
13.06 analysis of file RIBF128/R7_30 - dead time < 0.5%, 0 ts & 1 MBS timewarps - see attachment 21
13.10 online analysis - ADC data synchronised - see attachment 22
per DSSSD HEC x versus y spectra - see attachment 23
per DSSSD HEC E_p versus E_n spectra - see attachment 24
13.12 per DSSSD rates file RIBF128/R7_33
*** DSSSD # 1 count: 100283 old count: 52419 dt: 1.00 s LEC rate: 47699.10 Hz
*** DSSSD # 2 count: 143318 old count: 73956 dt: 1.00 s LEC rate: 69123.04 Hz
*** DSSSD # 3 count: 61925 old count: 31310 dt: 1.00 s LEC rate: 30509.53 Hz
*** DSSSD # 4 count: 42834 old count: 21364 dt: 1.00 s LEC rate: 21396.03 Hz
*** DSSSD # 5 count: 10974 old count: 5692 dt: 1.00 s LEC rate: 5263.80 Hz
*** DSSSD # 6 count: 29846 old count: 15307 dt: 1.00 s LEC rate: 14488.91 Hz
*** DSSSD # 1 count: 3 old count: 1 dt: 1.00 s HEC rate: 1.99 Hz
*** DSSSD # 2 count: 34 old count: 23 dt: 1.00 s HEC rate: 10.96 Hz
*** DSSSD # 3 count: 96 old count: 51 dt: 1.00 s HEC rate: 44.84 Hz
*** DSSSD # 4 count: 85 old count: 51 dt: 1.00 s HEC rate: 33.88 Hz
*** DSSSD # 5 count: 8 old count: 4 dt: 1.00 s HEC rate: 3.99 Hz
*** DSSSD # 6 count: 8 old count: 4 dt: 1.00 s HEC rate: 3.99 Hz
all SortSas spectra & histograms zero'd
13.13 DAQ stop
AIDA run file R7_33
13.15 BRIKEN starts run 47
BigRIPS starts run 3045 *** N.B. by mistake BRIKEN DAQ not actually started ***
AIDA on file R7_ 33
BNC PB-4
Amplitude 90,000
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency 25Hz range
delay MIN, tail pulse, INT ref
ASIC settings 2017Mar27-16.12.39
84Zn BigRIPS setting, 130Ag degrader setting - 2mm Al (in F7) + 3mm fixed + 1mm variable (in F11) = 6 mm Al
13.23 Beam stop to fix problem with STQ
DAQ stop
AIDA file RIBF128/R7_35
14:00 Beam is ON
AIDA file R7_43
14:01 BRIKEN starts run 48
BigRIPS starts run 3046
AIDA on file R7_ 44
14:48 Detector biases & leakage currents OK - see attachment 25
14:56 *All* system wide checks OK
FEE64 Temperatures OK - see attachment 26
Good events statistics OK - see attachment 27
Merger and tape server running - see attachment 28,29
15:16 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_64
15:25 Analysis of file RIBF128/R7_60 - zero timewarps, zero MBS timewarps - see attachment 30 |
|
645
|
Thu Jun 8 08:11:39 2017 |
NN, PV | Thursday 8 June 16:00 - 24:00 (evening shift) | 16:13 DAQ still running
16:34 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_388
16:36 BRIKEN starts run 069
BigRIPS starts run 3072
AIDA on file R7_389
16:37 Analysis of file RIBF128/R7_387 - zero timewarps, four MBS timewarps - see attachment 1
16:41 Beam is OFF
16:43 Beam is ON
17:04 *All* system wide checks OK
FEE64 Temperatures OK - see attachment 2
Good events statistics OK - see attachment 3
Merger and tape server running - see attachment 4,5
17:06 Detector biases & leakage currents OK - see attachment 6
17:37 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_402
17:40 BRIKEN starts run 070
BigRIPS starts run 3073
AIDA on file R7_403
18:32 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_415
18:34 BRIKEN starts run 071
BigRIPS starts run 3074
AIDA on file R7_416
18:36 Offline Analysis of file RIBF128/R7_412 - zero timewarps, zero mbs timewarps - see attachment 7
18:58 *All* system wide checks OK
FEE64 Temperatures OK - see attachment 8
Good events statistics OK - see attachment 9
Merger and tape server running - see attachment 10,11
Detector biases and leakage currents OK - see attachment 12
19:34 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_428
19:35 BRIKEN starts run 072
BigRIPS starts run 3075
AIDA on file R7_429
20:08 Offline Analysis of file RIBF128/R7_434 - zero timewarps, one mbs timewarps - see attachment 13
20:10 High Energy Correlation spectra - see attachment 14
AIDA on file R7_436
20:37 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_442
20:37 BRIKEN starts run 073
BigRIPS starts run 3076
AIDA on file R7_443
21:37 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_455
21:38 BRIKEN starts run 074
BigRIPS starts run 3077
AIDA on file R7_455
22:00 *All* system wide checks OK
FEE64 Temperatures OK - see attachment 15
Good events statistics OK - see attachment 16
Merger and tape server running - see attachment 17,18
Detector biases and leakage currents OK - see attachment 19
22:10 Offline Analysis of file RIBF128/R7_434 - zero timewarps, one mbs timewarps of FEE No.6 - see attachment 20
22:26 High energy hit pattern - see attachment 21
AIDA on file 466
Zero'd online spectra
22:39 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_469
22:40 BRIKEN starts run 075
BigRIPS starts run 3078
AIDA on file R7_470
23:42 BigRIPS and BRIKEN stop their DAQ
AIDA run file R7_483
23:43 BRIKEN starts run 076
BigRIPS starts run 3079
AIDA on file R7_484
23:47 Offline Analysis of file RIBF128/R7_480 - zero timewarps, one mbs timewarps - see attachment 22 |
|
631
|
Sun Jun 4 16:00:49 2017 |
NN, OH | Monday 5 June 00:00 to 08:00 | 23:59 BigRIPS and Briken stop their DAQ
AIDA run file R2_245
00:01 BRIKEN starts run 17
BigRIPS starts run 2016
AIDA on file R2_246
00:25 Analysis of file RIBF148/R2_250 - zero timewarps, four MBS timewarps - see attachment 1
00:37 per DSSSD rates file RIBF148/R2_250
*** DSSSD # 1 count: 768684 old count: 723417 dt: 1.03 s LEC rate: 43913.93 Hz
*** DSSSD # 2 count: 1122273 old count: 1056622 dt: 1.03 s LEC rate: 63688.64 Hz
*** DSSSD # 3 count: 427162 old count: 402923 dt: 1.03 s LEC rate: 23514.48 Hz
*** DSSSD # 4 count: 338200 old count: 317183 dt: 1.03 s LEC rate: 20388.79 Hz
*** DSSSD # 5 count: 204859 old count: 191893 dt: 1.03 s LEC rate: 12578.44 Hz
*** DSSSD # 6 count: 327506 old count: 307098 dt: 1.03 s LEC rate: 19797.99 Hz
*** DSSSD # 1 count: 3 old count: 3 dt: 1.03 s HEC rate: 0.00 Hz
*** DSSSD # 2 count: 46 old count: 43 dt: 1.03 s HEC rate: 2.91 Hz
*** DSSSD # 3 count: 7 old count: 6 dt: 1.03 s HEC rate: 0.97 Hz
*** DSSSD # 4 count: 32 old count: 30 dt: 1.03 s HEC rate: 1.94 Hz
*** DSSSD # 5 count: 77 old count: 72 dt: 1.03 s HEC rate: 4.85 Hz
*** DSSSD # 6 count: 1873 old count: 1748 dt: 1.03 s HEC rate: 121.26 Hz
01:00 BigRIPS and BRIKEN stop their DAQ
AIDA run file R2_262
01:02 BRIKEN starts run 18
BigRIPS starts run 2017
AIDA on file R2_263
01:43 Beam is OFF
01:45 Beam is ON
02:00 BigRIPS and BRIKEN stop their DAQ
AIDA run file R2_278
02:04 BRIKEN starts run 19
BigRIPS starts run 2018
AIDA on file R2_280
02:28 *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
FEE64 Temperatures OK - see attachment 2
Good events statistics OK - see attachment 3
Detector biases & leakage currents OK - see attachment 4
Merger and tape server still running - see attachment 5, 6
02:35 High energy correlation between x and y attachment 7
AIDA run R2_288
03:02 BigRIPS and BRIKEN stop their DAQ
AIDA run file R2_295
03:02 BRIKEN starts run 20
BigRIPS starts run 2019
AIDA on file R2_296
03:52 Analysis of file RIBF148/R2_305 - zero timewarps, two MBS timewarps - see attachment 8
03:59 BigRIPS and BRIKEN stop their DAQ
AIDA run file R2_311
04:02 BRIKEN starts run 21
BigRIPS starts run 2020
AIDA on file R2_312
04:59 BigRIPS and BRIKEN stop their DAQ
AIDA run file R2_328
05:02 BRIKEN starts run 22
BigRIPS starts run 2021
AIDA on file R2_329
05:11 *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
FEE64 Temperatures OK - see attachment 9
Good events statistics OK - see attachment 10
Detector biases & leakage currents OK - see attachment 11
Merger and tape server still running,No warnings/errors- see attachment 12, 13, 14
05:23 Analysis of file RIBF148/R2_332 - zero timewarps - see attachment 15
05:58 BigRIPS and BRIKEN stop their DAQ
AIDA run file R2_344
05:59 BRIKEN starts run 23
BigRIPS starts run 2022
AIDA on file R2_345
07:00 BigRIPS and BRIKEN stop their DAQ
AIDA run file R2_361
07:05 BRIKEN starts run 24
BigRIPS starts run 2023
AIDA on file R2_362
07:06 Detector biases & leakage currents OK - see attachment 16
07:12 All system wide checks OK except ADC calibration of nnaida1, 21 and nnaida clock status (status = 6)
FEE64 temperature OK - see attachment 17
Good event statistics OK - see attachment 18
Merger and tape server running, No warning/errors
07:17 Analysis of file RIBF148/R2_364 - zero timewarps, three MBS timewarps - see attachment 19
|
|
617
|
Wed May 31 08:00:26 2017 |
NN, CB | Wednesday 31 May 16:00 - 24:00 | 16:30 Check online data ok (R1_533) see attachment 1
16:39 BigRips and BRIKEN stop their runs
AIDA on file R1_550
16:43 Beam is off
16:47 All degraders completely removed
Beam on
current AIDA run R1_551
16:48 BRIKEN start run 40
BigRIPS start run 1041
AIDA on file R1_551
16:57 BigRIPS and BRIKEN stop their runs
AIDA on file R1_554
high energy correlation between x and y attachment 2
16:57 Beam is off
Degrader back to its place, thickness 14 mm
17:00 Checked chiller level - 50%
17:01 Beam is on
17:02 BRIKEN start run 41
BigRIPS start run 1042
AIDA on file R1_555
17:16 FEE's temperature normal
statistics normal
system wide checks ok
leakage current and bias ok see attachment 3
merger and tapeserver ok
17:17 high energy correlation between x and y attachment 4
current AIDA run R1_558
18:02 Beam is off
current AIDA file Run R1_570
BigRIPS and BRIKEN stop their runs
RH = 41.3%, T=24.3 C, DP=10.3 C
Degrader now 5 (in F7) + 6 (in F11) + 3 (in F11) = 14 mm
Refilled chiller - >95%
18:42 Beam is on
18:57 The optimization of beam tuning is going on
19:20 Optimization of beam done
19.28 BRIKEN start run 42
BigRIPS start run 1053
AIDA on file R1_588
BNC PB-4
Amplitude 90,000
x5 attenuator IN
t_r 100ns tau_d 50us
- polarity
frequency 25Hz range
delay MIN, tail pulse, INT ref
ASIC settings 2017Mar27-16.12.39
84Zn degrader setting - 5mm (in F7) + 6mm (in F11) + 3mm (in F11) = 14 mm
19.41 Detector biases; leakage currents OK - see attachments 5 & 6
FEE64 Temperatures OK - see attachment 7
good events statistics OK - see attachment 8
No warnings/errors reported by merger since DAQ GO - see attachment 9
*all* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
20.19 DAQ stops
AIDA file RIBF127R1/R1_601
analysis of R1_601 dead time <0.5% - see attachment 10
online analysis - ADC data synchronised - see attachment 12
online analysis per FEE64 HEC x versus y - attachment 11 mid-run - all SortSas spectra cleared -
attachment 13 end of run
why does x-y distribution appear to change?
distributions centred OK but now broader in x
20.20-20.39 various variable degrader settings to establish approximate degrader setting for 78Ni
20.39 BRIKEN start run 44
BigRIPS start run 1054
AIDA on file R1_606
78Ni degrader setting (to be checked) 5mm Al (fixed F7) + 9mm Al (fixed F11) + 1mm Al (variable F11) = 15mm Al
Offline sort of R1_602 for rates
*** DSSSD # 1 count: 156234 old count: 115866 dt: 1.04 s LEC rate: 38664.03 Hz
*** DSSSD # 2 count: 205986 old count: 152716 dt: 1.04 s LEC rate: 51021.42 Hz
*** DSSSD # 3 count: 72980 old count: 54270 dt: 1.04 s LEC rate: 17920.23 Hz
*** DSSSD # 4 count: 63677 old count: 45811 dt: 1.04 s LEC rate: 17111.86 Hz
*** DSSSD # 5 count: 24253 old count: 17204 dt: 1.04 s LEC rate: 6751.45 Hz
*** DSSSD # 6 count: 48843 old count: 34242 dt: 1.04 s LEC rate: 13984.68 Hz
*** DSSSD # 1 count: 75 old count: 52 dt: 1.04 s HEC rate: 22.03 Hz
*** DSSSD # 2 count: 114 old count: 82 dt: 1.04 s HEC rate: 30.65 Hz
*** DSSSD # 3 count: 118 old count: 78 dt: 1.04 s HEC rate: 38.31 Hz
*** DSSSD # 4 count: 107 old count: 67 dt: 1.04 s HEC rate: 38.31 Hz
*** DSSSD # 5 count: 54 old count: 30 dt: 1.04 s HEC rate: 22.99 Hz
*** DSSSD # 6 count: 4 old count: 4 dt: 1.04 s HEC rate: 0.00 Hz
20.50 all online histograms zero'd
21:21 analysed run from R1_588 to R1_601, couldn't find any timewraps.
21:41 BigRips and BRIKEN stop their runs
AIDA on file R1_620
21:44 BRIKEN start run 45
BigRIPS start run 1055
AIDA on file R1_621
22:04 FEE's temperature normal
statistics normal
system wide checks ok
leakage current and bias ok see attachment 14
merger and tapeserver ok
22:41 BigRips and BRIKEN stop their runs
AIDA on file R1_634
22:43 BRIKEN start run 46
BigRIPS start run 1056
AIDA on file R1_635
Offline sort of R1_635 for rates
*** data items: 3524688 ( 108739.47 Hz)
*** ADC events: 372675 ( 11497.32 Hz)
*** time warps: 0 ( 0.00 Hz)
*** DSSSD # 1 count: 160274 old count: 151136 dt: 3.43 s LEC rate: 46708.84 Hz
*** DSSSD # 2 count: 216907 old count: 205441 dt: 3.43 s LEC rate: 63213.47 Hz
*** DSSSD # 3 count: 74841 old count: 71214 dt: 3.43 s LEC rate: 21811.00 Hz
*** DSSSD # 4 count: 67870 old count: 63212 dt: 3.43 s LEC rate: 19779.44 Hz
*** DSSSD # 5 count: 25688 old count: 23773 dt: 3.43 s LEC rate: 7486.28 Hz
*** DSSSD # 6 count: 52420 old count: 48302 dt: 3.43 s LEC rate: 15276.82 Hz
*** DSSSD # 1 count: 73 old count: 69 dt: 3.43 s HEC rate: 21.27 Hz
*** DSSSD # 2 count: 137 old count: 131 dt: 3.43 s HEC rate: 39.93 Hz
*** DSSSD # 3 count: 141 old count: 130 dt: 3.43 s HEC rate: 41.09 Hz
*** DSSSD # 4 count: 141 old count: 130 dt: 3.43 s HEC rate: 41.09 Hz
*** DSSSD # 5 count: 47 old count: 41 dt: 3.43 s HEC rate: 13.70 Hz
*** DSSSD # 6 count: 9 old count: 9 dt: 3.43 s HEC rate: 2.62 Hz
23:20 Check online data ok (R1_642) see attachment 15
23:54 BigRips and BRIKEN stop their runs
AIDA on file R1_652
*************June 1st**********
00:03 BRIKEN start run 47
BigRIPS start run 1058
AIDA on file R1_654
BigRIPS not sending synchronizing pulse
00:09 BigRIPS and BRIKEN stop their run |
|
622
|
Thu Jun 1 16:06:03 2017 |
NN | Friday 2 June 00:00-08:00 | 00:35 Beam is on
current AIDA file R1_996
00:36 BRIKEN start run 72
BigRIPS start run 1083
AIDA file RIBF127R1/R1_996
00:55 Beam is off but DAQ of BRIKEN and BigRIPS are still running)
expecting it will be back within 10 minutes
AIDA file R1_1001
00:57 Analysis of file RIBF127R1/R1_1000 - dead time < 0.4% - see attachment 1
01:03 Beam is on
DAQ is running continuously
01:15 statistics normal
system wide checks ok
leakage current and bias ok see attachment 2
merger and tapeserver ok
01:25 BigRIPS and BRIKEN stop their runs
current AIDA run R1_1007
01:26 BRIKEN start run 73
BigRIPS start run 1084
AIDA on file R1_1008
01:36 FEE temperature is normal see attachment 3
02:22 BigRIPS and BRIKEN stop their runs
current AIDA run R1_1021
02:23 high energy correlation between x and y attachment 4
AIDA run R1_1021
02:26 BRIKEN start run 74
BigRIPS start run 1085
AIDA on file R1_1023
03:00 System wide checks all ok
FEE temperatures ok - attachment 5
Good event statistics - attachment 6
Merger and tape server still running - attachment 7
03:06 Leakages and bias ok - attachment 8
03:09 Beam is OFF
03:11 BigRIPS and BRIKEN stop their runs
current AIDA run R1_1033
04:10 Beam is still OFF
Investigation is still going on, on the ion source.
(Ion source were getting down more and more frequently before)
04:49 FEE's temperature normal
statistics normal
system wide checks ok
leakage current and bias ok
merger and tapeserver ok
(waiting beam)
06:01 Beam is ON
AIDA run R1_1069
06:02 BRIKEN start run 75
BigRIPS start run 1086
AIDA on file R1_1070
06:08 FEE's temperature normal
statistics normal
system wide checks ok
leakage current and bias ok see attachment 9
merger and tapeserver ok
06:20 Analysis of file RIBF127R1/R1_1072 - dead time < 0.6% (most of the FEE cards have 0.0%) - see attachment 10
07:01 high energy correlation between x and y attachment 11
AIDA run R1_1084
07:02 BigRIPS and BRIKEN stop their runs
current AIDA run R1_1084
07:04 BRIKEN start run 76
BigRIPS start run 1087
AIDA on file R1_1085
07:16 per DSSSD rates file RIBF127R1/R1_1086
*** DSSSD # 1 count: 92842 old count: 41280 dt: 1.05 s LEC rate: 49071.92 Hz
*** DSSSD # 2 count: 124879 old count: 56250 dt: 1.05 s LEC rate: 65314.71 Hz
*** DSSSD # 3 count: 44779 old count: 19466 dt: 1.05 s LEC rate: 24090.56 Hz
*** DSSSD # 4 count: 37971 old count: 18208 dt: 1.05 s LEC rate: 18808.59 Hz
*** DSSSD # 5 count: 15612 old count: 7434 dt: 1.05 s LEC rate: 7783.06 Hz
*** DSSSD # 6 count: 31207 old count: 14708 dt: 1.05 s LEC rate: 15702.22 Hz
*** DSSSD # 1 count: 27 old count: 11 dt: 1.05 s HEC rate: 15.23 Hz
*** DSSSD # 2 count: 89 old count: 43 dt: 1.05 s HEC rate: 43.78 Hz
*** DSSSD # 3 count: 82 old count: 44 dt: 1.05 s HEC rate: 36.16 Hz
*** DSSSD # 4 count: 65 old count: 32 dt: 1.05 s HEC rate: 31.41 Hz
*** DSSSD # 5 count: 29 old count: 17 dt: 1.05 s HEC rate: 11.42 Hz
*** DSSSD # 6 count: 6 old count: 3 dt: 1.05 s HEC rate: 2.86 Hz
07:22 FEE's temperature normal - see attachment 12
statistics normal - see attachment 13
system wide checks ok
leakage current and bias ok
merger and tapeserver ok - see attachment 14 |
|
940
|
Thu Dec 14 10:53:27 2023 |
NH, MP, CC, GA | Snout Removed | Snout removed from S4
All detectors removed
BB7 taken to lab
bPlastic taken to testing hall
AIDA BB18 left in box under AIDA-3 with other DSSSDs
Snout on green table in rear of Messhütte |
|
933
|
Thu Dec 7 17:30:36 2023 |
NH, CC, VP, TD | Thursday 7 December |
Stack re-assembled - upstream to downstream
- 'upstream' bPlast
- no spacer
- black cloth optical screen on steel frame ( c. 1.5cm diamond hole lower left side in direction of beam )
- std 9mm spacer
- MSL type BB18(DS)-1000 24cm x 8cm 3208-3/3208-21/3208-22
- std 9mm spacer
- MSL type BB7(DS)-1000 3542-13 ( approx central wrt BB18 )
bPlast cables screened 3M 1245 + Kapton film + drain wire
bPlast cables currently floating
bPlast driver PCBs disconnected
FEE64 aida06 adaptor PCB currently disconnected
ASIC settings 2023Nov16-18.55.20
BNC PB-5 pulser - not connected
DSSSD bias -150V -5.13uA - attachment 1
FEE64 temperatures Ok - attachment 2
All system wide checks OK
ADC data item stats OK - attachment 3
Note *very* low rate in aida02 ( n+n Ohmic side )
p+n 1.8.W spectra - 20 us FSR - attachments 4 & 5
per FEE64 rate spectra - attachment 6
n+n 1.8.W spectra - 20us FSR - attachments 6 & 7
AIDA To Do
replace aida04
pulser walkthrough |
|
934
|
Fri Dec 8 11:32:44 2023 |
NH, CC, VP, TD | Friday 8 December |
Change n+n FEE64 aida04 d8:80:39:41:f6:b7
asic #1 faulty
aida04 MAC from d8:80:39:41:f6:b7 to d8:80:39:41:ba:2b
restart dhcpd ( systemctl restart dhcpd )
DSSSD bias -150V -5.17uA - attachment 1
FEE64 temperatures OK - attachment 2
All system wide checks OK
ADC data item stats - attachment 3
High rates observed in all FEE64s *except* aida01 & aida04 => aida04 asics #1-4 OK
CC/VP have commenced cabling bPlast - will await completion of install to review noise
n+n 1.8.W spectra - 20 us FSR - attachments 5
per FEE64 rate spectra - attachment 4
18:20 AIDA noise status test
bPlast - cabling complete, power on - all sides
BB7 Mesystec preamps connected, power off, no detector HV
DSSSD bias -150V -5.355uA - attachment 6
FEE64 temperatures OK - attachment 7
All system wide checks OK
ADC data item stats - attachment 8
Rates c. 10-20k mostly dominated by a few 'hot' channels
per FEE64 rate spectra - attachments 9 & 10
p+n 1.8.W spectra - 20us FSR - attachment 11
bPlast using 152Eu source for test - signal observed aida01 3.8.W may be recoil electron from Compton event
n+n 1.8.W spectra - 20 us FSR - attachment 12
Some photos of bPlast & BB& preamp/cabling attached
re-bPlast note that
cables screened 3M 1245 + Kpaton + drain wire -> drain wires *not* connected to ground
PSU ch 4 not ground referenced
|
|
925
|
Tue Nov 21 13:56:59 2023 |
NH, CC, HA, MP, AM, VP | Tuesday 21 November | Connect the BB7 on top of the snout to the former aida05 (FEE above aida01)
Also remove copper busbar that is unused
Power on AIDA... rates terrible (attachment 1)
Reground AIDA stand to platform base ... small improvement but nothng major
Decide to power OFF, recheck all connections, aida02 ERNI maybe a bit loose, otherwise all good.
Remove BB7 to try to restore status quo ante
Power on again and rates much improved (attachments 2 & 3)
Looks similar to attachment 44 on Aida test 17/11/23
-> Back to status quo?
15:05 : BB7 put back on the snout and connected (ground + HV)
No significant change has been noticed (attachments 4 & 5)
Attach cables 14 to FEE that BB7 is connected - then will configure DHCP for aida09
Start up aida, configure as before. AIDA09 appears but is not configured (ASIC settings just copied from aida08 for now)
Rates on aida look OK still (attachment 6)
HV (attachment 7)
Temps (attachment 8) |
|
911
|
Mon Oct 23 10:52:06 2023 |
NH, CC | AIDA test | Started AIDA at 11:50, writing to disk: file BG18OCT2/R3, stopped around 3 pm
pict1: HV supply
pict2: temperature
pict3: spectrum in stat, layout2
pict4: statistics |
|
912
|
Mon Oct 23 14:08:06 2023 |
NH, CC | AIDA test | Started AIDA at 3:05pm, writing to disk: file BG18OCT2/R4, stopped 18.30
pict1: HV supply
pict2: temperature
pict3: spectrum in stat, layout2
pict4: statistics
pict5: sum spectra at 18:20 (3.4 hours)
system power off and unbiased |
|
910
|
Thu Oct 19 10:39:20 2023 |
NH | Thursday 19 October | Water Temp: 20 C - Flow felt on pipe
AIDA interlock OVERRIDE
One USB Hub for the FEE64 TTYs was unplugged on cable tray, replugged in
(may fix Pi_Monitor)
Bias DSSD (Ch 3)
Leakage current stays at 17 uA during ramp up. At 150 V it quickly drops back to 6 uA
Fig 1
Current FEE mapping
p+n aida09 aida01 aida10
aida11 aida03 aida12
n+n aida02 aida04
Unused aida06 aida08
Due to merger need 8 FEEs 1-8 to merge properly will temporarily renumber for 1 DSSSD test
- Will revert to this numbering for experiment!
Power up with unchanged configuration to test
Fee Temps OK Figure 2
Start DAQ at 0x64 threshold (1 MeV)
Most channels 0 rate (expected)
ASIC01 of AIDA4 very hot
2 channels in aida10 very hot
Figure 3
Pulser OFF and only connected to aida11 aida03 aida12
LOCAL operation at present 10V/10X level, positive tail, 25 Hz
STOP and Power off to renumber
New mapping for now:
p+n aida05 aida01 aida06
aida07 aida03 aida08
n+n aida02 aida04
aida09 ---> aida05
aida10 ---> aida06
aida11 ---> aida07
aida12 ---> aida08
-
Backup dhcpd.conf -> dhcpd.conf231019
Update to only first 8 fees
only turn on Relay 1
Update MIDAS Tcl
/MIDAS/config/TclHttpd/aidas-gsi@8015/startup.Tcl
list aida01... aida08
new folder
/home/npg/LayOut/GSI_triple_test_renumber
copy to /tmp
-
Reboot MIDAS and Power on Relay 1
Power OFF
Reboot dhcp!
Anydesk Connection Lost??
Make new DB key 2023Oct19-13.46.30
Copy aida01/CONTENTS (p+n) to aida06 and aida08
Cannot update Options http://localhost:8015/AIDA/Options/Options.tml ? Error 500
Figure 4
Load settings manually and check-load ASIC
TODO: Manually change files, or?
GO
ADC items + rates figures 5, 6
Restart Merger
xfer Links (bad)
Netvar -> Inquire Registers
NetVar.MERGE.RunOptions WRITE 1
Merger now shows xfer Links => Merger
Merger GO
Open file BG18OCT23 R1
STOP DAQ
Data Xfer #1 Enable
GO DAQ
See merger links all GSI_triple_test_renumber
Enable output to data storage
xfer Links => Merger => storage
See tape rate: 3 MB/s (!)
Also start MBS on x86l-119 (new AIDA FDR) and try MBS relay
rate seen in MBS
Figure 8 - Accumulated statistics for ca 3 hours
Figs 9, 10 - ADC spectra
System turned off and DSSSD biased down for end of work day, due to water issue |
|
915
|
Mon Nov 6 17:30:44 2023 |
NH | Aida Alpha Analysis | Analysis of tape folder /TapeData/BG18OCT23
Using Go4 https://github.com/cej25/DESPEC_NOV23
Figure 1: Hit pattern (XY)
Figure 2: Energy 1D Spectra, alpha peaks visible
Figure 3: Energy X vs Energy Y
Figure 4: 1D Strip (0-386 = X 0-386, 386-512 = Y 0-128) and Energy
Some gaps at 112-114, 121-128 = aida05
Hot channels at 368, 381, 382 = aida06 (high rate seen)
Gap at 435-450 = aida04 (ASIC#4 which is faulty)
Generally 1-10 counts per strip, 1 ch wide gaps may be statistics or issues |
|
926
|
Wed Nov 22 13:44:36 2023 |
NH | Report - Cannot change per-ASIC Settings | On ASIC settings page trynig to change the settings for one ASIC (e.g. ASIC1 of aida09) seems to cause all 4 ASIC settings to change
1. Ensure act on all FEEs and act on all ASICs unticked
2. Change aida09 asic1 low_ref to 0x1
3: Change to aida09 asic4
4: aida09 asic4 low_ref also changed to 0x1 |
|
927
|
Wed Nov 22 14:52:43 2023 |
NH | AIDA Pulser Calibration | Connect pulser to all p+n FEEs
Turn on pulser, 100 Hz (attachment 3 for settings), rates OK (attachment 1)
1 minute at 10V.. 9V.. 1V (5X atten)
Most FEEs OK (attachment 2), aida07 and aida08 weird?
FILE: PULSER21NOV23/R4
Check in S4, one pulser LEMO not in fully, reseat and try again
File R5... much better! (attachment 4) |
|
929
|
Thu Nov 23 10:00:16 2023 |
NH | Report - Cannot change per-ASIC Settings | > On ASIC settings page trynig to change the settings for one ASIC (e.g. ASIC1 of aida09) seems to cause all 4 ASIC settings to change
>
> 1. Ensure act on all FEEs and act on all ASICs unticked
> 2. Change aida09 asic1 low_ref to 0x1
> 3: Change to aida09 asic4
> 4: aida09 asic4 low_ref also changed to 0x1
Variable dumps for ASIC and ASIC4 |
|
930
|
Fri Nov 24 10:36:06 2023 |
NH | Friday 24 November | Pulser LEMOs removed from p+n fees
Pulser connected to n+n fees: aida02 and aida04
BNC PB-5 Polarity --> NEGATIVE
HV and FEE power up
Rates look similar to usual (Attachments 1 and 2)
Turn on pulser, see them in n+n spectra as expected (attachment 3)
Pulser run R6
See peaks in ADC spectra (attachment 4)
Remove pulser from aida02, left on aida04 with 50Ohm terminator
AIDA powered off, HV off |
|