 Sun Jun 4 08:13:10 2017, LHB, PV, NN, 4th June 16.00-00.00 28x
|
16.25 *All* system wide checks OK *except* ADC calibration of nnaida1, 21 and nnaida1 clock status (status=6)
FEE64 Temperatures OK - see attachment 1
Good events statistics OK - see attachment 2
|
|
Tue May 24 07:12:30 2016, TD, 3x WDC WD30EFRX ATA 3Tb disks added to aidas1 LVM configuration 9x
|
The 3x WDC WD30EFRX ATA 3Tb disks installed in aidas1 in April 2015 (formerly /data20, /data30 and
/data40) have now been added to the aidas1 logical volume management (LVM) configuration to form a
|
|
Fri Jun 2 08:25:34 2017, LHB, 2nd June Evening Shift 20x
|
16.34 Beam is off
Aida R_1216, BRIKEN (83)/BigRIPS (1094) continue to run for background data
|
|
Tue May 24 00:06:26 2016, TD, 24 May 2016
|
Overnight. DAQ stopped. Detector bias off. FEE power and recirculating chiller on.
08.00 Detector bias on OK - see attachments 1-2
|
|
Mon May 23 07:28:38 2016, TD, 23 May 2016 25x
|
12.45 Rly16 'Sequence ALL On' operational
15.20 Startup remote control of CAEN N1419 4-ch HV modules
|
|
Fri May 22 11:58:02 2015, TD, 22 May 2015 6x
|
MSL type BB18 serial 2998-22
|
|
Fri Feb 19 10:23:31 2016, TD, 19 February 2016
|
MSL type BB18(DS)-1000 serial 2998-22
Bias +200V, I_L +=6.070uA, ambient temperature +20.2 deg C
|
|
Fri Jun 9 09:12:03 2017, ZLiu, AE, 17:00-24:00
|
17:06 BRIKEN and BigRIPS stop their DAQs
AIDA on file R7_723
|
|
Wed Feb 17 11:54:50 2016, CG, TD, 17 February 2016 6x
|
File R17 -> pulser walkthrough.
- Started ~10.00
- Pulser peak amplitude taken from 9.0V to 1.0 V in 1.0V steps
|
|
Tue Feb 16 17:32:21 2016, CG, TD, 16 February 2016
|
MSL type BB18(DS)-1000 serial 2998-22
Bias +200V, I_L +=6.150uA, ambient temperature +20.1 deg C
|
|
Sun Jul 16 09:36:40 2023, TD, 15-16 July 2023 40x
|
Saturday 15 July
|
|
Fri Nov 13 16:17:14 2015, CG, TD, 13 Nov 2015 - new Kapton cable tests at DL 6x
|
Powered system up with 4 bare 45cm kaptons connected and nothing seems to have changed from where we left last night
Waveforms in nnaida11 look good and peak widths in nnaida11 1.8.L and 1.10.L are ~70ch.
Turned off flash ADCs for all FEEs by setting Q8_transfer.vhd: 0xa00, offset 0x00, to 0 to assess any affect they may play in the observed noise |
 Sat Nov 14 20:19:43 2015, CG, TD, PJCS, 13 Nov 2015 - new Kapton cable tests at DL
|
Quote:
Powered system up with 4 bare 45cm kaptons connected and nothing seems to have changed from where we left last night |
|
Thu Nov 12 18:28:41 2015, CG, TD, 12 Nov 2015 - new Kapton cable tests at DL 23x
|
This morning PC-S changed firmware and DAQ software to that of the RIKEN setup
Firmware version /MIDAS/AIDA/FEE_Riken_Apr14_26.bin
DAQ software has been changed from AidaExecV8 to AidaExecV7 |
|
Wed Nov 11 17:36:19 2015, CG, TD, 11 Nov 2015 - new Kapton cable tests at DL 18x
|
Upon starting system with nothing connected beyond adapter PCBs, observed pulser peak FWHM of ~12-15ch in nnaida13+14 and ~15-18ch in nnaida11+12
All newly shielded new kapton cables passed continuity tests between drain wire and Cu tape.
Throughout all tests, grounded cable has been connected to nnaida13. All other nnaida have ground isolated cables. |
|
Sat Jun 10 15:56:31 2017, ZLiu, 0:00-8:00 11 June 2017 46x
|
00:35 Stop DAQ
AIDA file RIBF128/R7_1172
00:36 Start DAQ
AIDA file RIBF128/R7_1172
BRIKEN file 118
BigRIPS
file 4008
00:50 Detector biases & leakage currents OK - see attachments 4, 5
FEE64 Temperatures OK - see attachments 3
good |
|
Wed Oct 1 18:37:42 2014, Chris Griffin, 01/10/2014 Tests @ DL 11x
|
Kept largely the same settings at the entry https://elog.ph.ed.ac.uk/AIDA/4
Same ASIC settings
Emco used to provide HV |
|
Mon Jun 6 13:46:45 2016, TD, ML & YS, /var/log/messages
|
| aidas1 log |
|
Wed Nov 22 15:12:40 2023, TD, /tmp/log8015_error
|
| |
|
Tue Apr 28 05:59:48 2015, AE, "beta" trigger from MACB Trigger outputs 6x
|
We've constructed a beta trigger with the signals from the p-side of the three DSSDs (OR of all fast
discriminator channels of each FEE).
|