AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
BRIKEN
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Mon Mar 31 13:10:25 2025
Author
*
:
Subject
*
:
> We started the synchronization monitoring programs to check that > it is OK as can be seen in the figure below > > We are using the same scheme used during Ahn parasitic run, > namely the synchronization check signal is the BigRIPS trigger > signal send by them to us (AIDA, BRIKEN). > > The monitorization procedure is different from the one used > in 2016. The description to lauch the processes is described > here below and in the attached PDF. > > *********** > > To Launch the processes: > > Open 4 terminals: > > Terminal 1 (DataSink) type: > > >ssh aida@d05 > > >cd /home/aida/DataPackage/DataSink/Linux64 > > >DataSink -i 3 > > Terminal 2 (SynCheck) type: > > >ssh aida@d05 > > >cd /home/aida/SyncCheck > > >./SynCheck > > Terminal 3 (BigRIPS Data Relay) type: > > >ssh aida@d05 > > >cd /home/aida/ribfts/ribftssender > > >./ribftssender_mar17ca debug > > (specific for current 40Ca parasitic run because we are not sending > a pulse signal to BigRIPS as trigger but receiving triggers from > BigRIPS to create the pulses) > > Terminal 4 (AIDA Data Relay) type: > > >npg@aidas1 > >DataRelayFilter -n 10.32.0.12 -p 10307 -I 2 > > "-I 2" selects ID 2 as the one for the AIDA data stream, > which must correspond to the one expected by the DataSink in the d05 PC. > The programming transmitting the data from AIDA to the DataSink includes an > intermediate filtering step. This selects only correlation scalers from one > module (and possibly ADC values from one channel in that module). > > Gasific MainWindow (Briken Data Relay): > > In the DAQ Control tab: Click "Start Sync Monitoring" button. > > In the pop up window set server ip and port (ip:10.32.0.12, port:10305) > > By default this perform a check on the differences RIBF-BRIKEN and AIDA-BRIKEN. > > In case that BRIKEN is not running, the option "SynCheck -M 1" check the differences > AIDA-RIBF and BRIKEN-RIBF, while "SynCheck -M 2" checks RIBF-AIDA and BRIKEN-AIDA > > To synchronize: > > In the Gasific MainWindow, DAQ Control tab: Click "Send Sync Pulse" button
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown