ELOG BRIKEN

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

BRIKEN

Fields marked with * are required
Entry time:	Mon Mar 31 13:11:07 2025
Author*:
Subject*:
> The PB-5 Pulse generator labeled "Pulser 2" and the 428F Linear Fan in-out labeled "Clover G7" from BRIKEN NIM crate have to be returned to the RIBF electronics pool because the > borrowing time is expired. > > For the Pulser 2, the external trigger input and pulse output cables were labeled before removing the module. > > - Attachment 1: Original position and cabling of the pulser. The serial number of the pulser is 052010010247 > - Attachment 2: A picture of the crate after removing the pulser. > - Attachment 3: Original Pulser setting. > > The Linear Fan in-out was replaced with a new module (same version 428F), which can be used for a long time. The position of the input and output cables in the module were kept > unchanged. > > - Attachment 4: Original position and cabling of the Linear Fan in-out module. The serial number of the original module is 051999070282 > - Attachment 5: New Linear Fan in-out module after replacement. > - Attachment 6: Oscilloscope view of the 10kHZ NIM test input signal (blue) and output signal (yellow) of the old Linear fan in-out module. > - Attachment 7: Oscilloscope view of the 10kHZ NIM test input signal (blue) and output signal (yellow) of the new Linear fan in-out module. Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown