AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  BRIKEN  ELOG logo
 List  |  New  |  Edit  |  Delete  |  Reply  |  Duplicate  |  Find  |  Config  |  Help 
Message ID: 36     Entry time: Fri Jul 15 08:29:14 2016
Author: Nathan Brewer, Shintaro Go 
Subject: Expected Performance and Voltage Setting for Germanium 

Expected Resolution:

------------------------------

G7 should be ~2.0 keV FWHM at 600 keV for all crystals.
D4 should be as low as 1.8 and as high as 3.3 keV FWHM at 600 keV.

 

 

Configuration File: (~/DAQ_1/include/hvmon.conf)

-----------------------------------------------------------------

 Type      IP address    channel  slot  name   voltage   Current   RampUp  RampDn    Switch On/Off
                                                                                     V             uA      V/s     V/s            1/0
  ------    ---------------            ---------    -----    ----      -------     -------   ------  ------    -------------
 0        192.168.13.239         0           3     D40      3000       0.5       2       5             1
 0        192.168.13.239         1           3     D41      3000       0.5       2       5             1
 0        192.168.13.239         2           3     D42      3000       0.5       2       5             1
 0        192.168.13.239         3           3     D43      3000       0.5       2       5             1
 0        192.168.13.239         4           3     G70      2500       0.5       2       5             1
 0        192.168.13.239         5           3     G71      3000       0.5       2       5             1
 0        192.168.13.239         6           3     G72      2500       0.5       2       5             1
 0        192.168.13.239         7           3     G73      2500       0.5       2       5             1
 

In all cases (Temperature Monitor, ACQ, etc.) D4 comes before G7 and in the same order.

 

 

 

 

ELOG V3.1.4-unknown