18/10/21 START: 19:21
18/10/21 STOP: 23:04
252Cf at z=0cm, source axis perpendicular to beam axis, typical orientation.
Pulser is totally disconnected.
Low threshold.
** Configuration file:
181016_Conf_BrikenFull_2153_test_thr.xlsx
ROOT file:
181019_2339_252Cf_z0cm_NOpulser_2304.root
DLT files:
181019_2339_252Cf_z0cm_NOpulser_072.dlt
181019_2339_252Cf_z0cm_NOpulser_073.dlt
181019_2339_252Cf_z0cm_NOpulser_074.dlt
Comment:
- Clovers were placed outside the moderator
- AIDA not inside the moderator.
- Without In beam PE shielding.
**** There is a mistake in the time stamp of the name of the files, it says 181019_2339, it should be
181021_1921. This issue is corrected in the offline files. |