ELOG BRIKEN

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

BRIKEN

Fields marked with * are required

Entry time:

Tue Feb 24 09:34:54 2015

Author*:

Subject*:

We have performed a successful test of the integration of independent DAQ systems based on a correlation 
scalar counted from a common clock signal. The principles of the integration method are described in the 
following AIDA elog entry: https://elog.ph.ed.ac.uk/AIDA/29

The configuration of the setup we used in the RIKEN test is described by the attached figure:
DAQcorrelation_diagram.pdf. The chosen solution was to use a 25 MHz clock generated by the MACB modules of 
AIDA, which was distributed to the other two systems by a SIS36/38xx module in the BRIKEN VME crate (a 
slightly modified versio of the method proposed by PCS in AIDA Elog#29).

The correlation can be monitored online using the MIDAS DataXfer and DataSpy toolkits 
(http://npg.dl.ac.uk/MIDAS/DataAcq/Data.html). Each system operates a DataRelay program that sends a data 
stream consisting only of IDs and time-stamps to a common DataSink (this requires a DataRelay code that 
does 
some filtering of the raw data). The scheme is shown in the attached diagram (DAQsoftware.pdf).

The DataPeek_Merge and SyncCheck codes use C++11 for parallelization of tasks, which is a helpful feature 
to
improve the efficiency of finding coincidences between the correlation pulses. Thus,  the code will not 
run 
in PCs with any Linux version. For example, it requires version 7 of ScientificLinux, which installed in 
the 
PC being used for BRIKEN DAQ control that will stay at RIBF for the time being.

++ SYNCHRONIZATION RESULTS ++

The figure correlation_25Hz.png shows a correlation plot for the BRIKEN+RIBF+AIDA running with 
correlations 
done by a pulser at 25 Hz. A large fraction of the pulsers appear in the double-coincidence plots (top 
row; 
same plots, except the 'Partial' one is automatically cleared every ~10seconds).

The bottom plots show the pair-wise correlations between BRIKEN and RIBF or AIDA. BRIKEN was defined as 
the
'master' in this test, but current version of the program is flexible to select any stream as the master 
one.

The second figure (correlation_random.png) shows the same test, but using a non-periodic pulser to trigger 
the correlation scalar. We observed the same level of synchronization (peaks look broader because of the 
zoom level).

Encoding: HTML ELCode plain
Suppress Email notification Resubmit as new entry

Attachment 1: