AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
BRIKEN
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Mon Mar 31 13:11:50 2025
Author
*
:
Subject
*
:
> dE detector is mounted onto the back side of the shielding (attached photo: dE_position.JPG) > > The detector consists of 26 strips. In this setup, the detector is devided into 2 parts corresponding to 2 readout channels. Each part consists of 13 strips joint together. > > Output signal from a high gain channel of preamplifier with 137Cs source is shown in attachment 137CsTest_ac.JPG.; > > The white noise is about 2 mV for high gain mode. > > We will switch to low gain mode during the experiment. > > * note:there is a 200 mV offset due to the characteristic of the preamplifier (see attachment dc.JPG)
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown