ELOG CARME

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

CARME

Fields marked with * are required
Entry time:	Fri Apr 4 02:45:26 2025
Author*:
Subject*:
Attempted to activate 2xUHV1400 connected to bottom C4, channel #2 using P 200 W, t rise 30 min, t hold 90 min. Temperature of Kapton bundle increased drastically to 160+ C. Had to stop. Conclusion is that these are likely the two UHV1400 on the bottom of CARME, immediately in front of the Kapton bundle. Left the chamber to cool for a while. Baking temperature set to 85 C. Repeated attempt using above parameters except P 150 W. Too hot. Had to decrease P to 75 W to remain below 150 C on the Kapton bundle. Temperature on internals increases slowly, even with P 75 W. Lesson learned: activate the UHV1400 next to the detectors last. Once on, temperature increase on the detectors can be reduced but not stopped. Attempted to activate 2xUHV1400 on bottom C4, channel #3 using P 200 W, t rise 30 min, t hold 90 min. These cannot be close to the detectors. Possibly due to interference with #2 being on hold, temperature of internals starts increasing. Reduced P to 125 W. OK. Second lesson learned: temperature on internals is very hard to control once the UHV1400 close to them are activated. Activate other UHV1400 first. Set #2 to hold 50 W. Set #3 to hold 50 W. Attempted to activate 3xUHV1400 on bottom C4, channel #4 using P 120 W, t rise 30 min, t hold 90 min. These are definitely close to the detectors. Temperature increase modest but noticeable. Activation completed before temperature increases too much. 17:30 German time Activation complete. All NEGs off simultaneously. Heating power off. CARME slowly cools down (<10 C/h) Opened some parts of the jacket to allow better cooling (still <10 C/h) Pressure reaches E-11 around 19:00 SIP elements in D2000 still at 120 C. Too hot to turn on. SIP elements will be turned tomorrow morning. That should conclude this baking cycle. Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown