AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Apr 9 00:13:24 2025
Author
*
:
Subject
*
:
<p>Used thermocamera provided by GSI beam diagnostic division to take some pictures of YR09. See attached.</p> <p>Due to aluminium outer wrapping some reflections are inevitable, but tried to only take pictures of heat spots that did not disapper from different angles.</p> <p>Temperature calibration may be not perfectly reliable as well.</p> <p> </p> <p>1. Gap close to CARME outside motors</p> <p>2. CARME top valve</p> <p>3. CARME top valve</p> <p>4. CARME turbo</p> <p>5. Interaction chamber looking downstream from outside of ring. Note flexible hose pumping Be window.</p> <p>6. As 5, from inside the ring.</p> <p>7. Interaction chamber detail (see top left in picture above)</p> <p>8. IE514 sensor on interaction chamber bottom</p> <p>9. YR09 from inside the ring. Note electron target</p> <p>10. As above, looking further upstream</p> <p>11. YR09 from inside the ring, looking downstream towards CARME</p> <p>12. Electron target from inside the ring</p> <p>13. Electron target from outside the ring. Biggest flange.</p> <p>14. Interaction chamber from inside the ring</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown