AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Jan 15 11:28:10 2022
Author
*
:
Subject
*
:
<p> </p> <pre> Vaccum DN250CF 1x gaskets DN200CF 5x gaskets DN160CF 1x gaskets, 2x blank flanges DN100CF 69x gaskets, 19x blank flanges, 14 double feedthroughs (1 damaged) DN63CF 3x gaskets, 2x blank flanges DN300CF 5x gaskets DN350CF 0x gaskets 1X WIRE SEAL DN35CF 3x gaskets, 13 blank flanges DN16CF 22x silver gaskets, 27x copper gaskets Swagelock SS-QTM2-D-8M0 Male quick disconnect X18 SS-QTM2A-B-8M0 Female quick disconnect X21 SS-8M0-1-6RS Manifold adaptor X39 NY-8M3-1 Front ferrule X118 NY-8M4-1 Back ferrule X120 Stainless ferrules XMANY FEE/FEE HOLDER PARTS FEES x1 Fully assembled FEE holder (MINUS ADAPTOR BOARDS) x1 Cylindrical supports x32 Feedthrough mounts x12 Black adaptor board mounts x11 Spring loaded FEE lock x26 FEE holder side panels x5 pairs Adaptor boards x2 (1 slightly bent pins) FEE rail bolts x4 M3X16 281-013 x91 M3 locknuts 260-5815 x34 Springs 821-273 x40 M4x25 (2mm too long) 281-057 x32 M6x20 281-120 x69 M3x6 280-981 x34 Assembled Hose 1.5M (Red) x8 Assembled Hose 1.5M (Blue) x8 Blue Hose ~16M Red Hose ~10M </pre> <p>We require additional gaskets for those we are low on (<5) DN35,63,160,250,350 and more wire seals </p> <p>We should have enough swagelock and FEE holder parts to construct another 4 FEE holders for the remaining required for mounting all moving detector FEEs.</p> <p>We also need fuses for the USB mains relay and power supply -> 2x 250v 10A, 16x 250v 1.6A. Dimensions for both are the same, length=20mm, Diameter=5mm (images attached)</p> <p>Additional fittings provided by GSI for the manifold are in the swagelock box.</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
20220115_162649.jpg
Original size: 2250x3000
Attachment 2:
20220115_162712.jpg
Original size: 2250x3000
Attachment 3:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown