AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Feb 23 16:57:35 2022
Author
*
:
Subject
*
:
<p>Optimised motor motion during run R58</p> <p>Moved 2 mm in (20.3 potentiometer)</p> <p>29.47 potentiometer</p> <p>36.5 potentiometer</p> <p>(started moving pneumatic)</p> <p>64.36 potentiometer</p> <p>74.03 potentiomater (servo in by 10 mm)</p> <p> </p> <p>Moved in, collected counts for 5 minutes, moved out, waited for re-injection.</p> <p> </p> <p>20.3 - 400 counts on the Rutherford peak, bins 125-131 on lowEnergyExTotalDSSD0</p> <p>20.47 - 646</p> <p>36.5 - 827</p> <p>64.36 - 3900</p> <p>74.03 - 10040</p> <p> </p> <p>Based on Rutherford rate ratio, estimated we are 40-50 mm away from interaction point, i.e. beam roughly 1-2 cm on outer half of ring which may be consistent with BPM measurement in YR08</p> <p><br /> Decided to use 74.03 mm for data collection.</p> <p>Started data acquisition on R59 at 17:27</p> <p>Beam 3E7 at injection, 600 second storage, 3 second between cycles</p> <p>Target pressure 1.3E12 based on 8.21E18 x S1=1.6E-8</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown