AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Apr 4 17:18:21 2025
Author
*
:
Subject
*
:
15.51 1.8.W spectra 20ms, 2ms, 200us, 20us FSR - attachments 1-8 15.55 Lost control of motors - moving DSSSDs out 15.56 new run number 79 ignore run number 80 17:58 new run number 81 CB sets motion cycle from 20.28mm to 64.36mm Observe a second, higher energy peak during the part of the cycle where the DSSSD is moved out - see attachments 9-10 Peak appears only when moving out. Does not appear when moving in/out manually on beam storage plateau. Does not appear when moving in synched with ring, waiting less than the storage time, and moving out. All seems to indicate it is due to beam injection and not moving out fast enough. Very weak halo piling up? Should be clear in the data depending on rate / strips affected. 18.45 new run number 82 DSSSD position fixed 34.89mm 22.10 system wide checks OK *except* WR decoder status Base Current Difference aida01 fault 0xab60 : 0xab8c : 44 aida02 fault 0x88d3 : 0x88fe : 43 aida03 fault 0x23aa : 0x23d6 : 44 aida04 fault 0x15d7 : 0x1603 : 44 aida05 fault 0x2f03 : 0x2f0f : 12 White Rabbit error counter test result: Passed 0, Failed 5 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR FEE64 temperatures OK - attachment 11 ADC data item stats OK - attachment 12 merger, tape server and console OK - no merger error messages since startup - attachments 13-15 DSSSD bias -100V leakage current-3.2360uA run82 - integrated x & y strip energy spectra - attachments 16-17
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown