AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Apr 4 17:13:49 2025
Author
*
:
Subject
*
:
<p> <table width="98%" align="center" cellspacing="1" style="border:1px solid #486090;"> <tbody> <tr> <td cellpadding="3px" style="background-color:#486090; font-weidht:bold; color:white;">Quote:</td></tr> <tr> <td cellpadding="10px" style="background-color:#FFFFB0;"><p>15:15</p> <p>Temperature setpoint = 113 K</p> <p>Target density is OK for now. S1 vaies between 2E-8 and 3.5E-8 mbar. E4 between 1E-9 and 1E-8 mbar.</p> <p>Detector motors functioning well. Moving between 23.1 mm and 67.43mm. Move in and move out counters the same. Correlation scalar 8 for detectors moving is seen on aida1</p> <p>Rutherford rate peak varies between 10^3 peak height when fully in and ~10^2 when fully out. No peak from halo seen in rate.</p> <p>Beam intensity ~ 1E8</p> <p>Merger OK</p> <p>Data rate ~ 1700 kb/sec</p> <p>Run is Run 87 - started 10:34</p> <p>Data spy restarted at 15:00 so only include Run87 data.</p> <p>Leakage current = 3.205 uA</p> <p>Fee Temperatures OK</p> <p>System checks OK - wr fails</p> <p> Base Current Difference<br /> aida01 fault 0xab60 : 0xaba3 : 67 <br /> aida02 fault 0x88d3 : 0x8914 : 65 <br /> aida03 fault 0x23aa : 0x23ed : 67 <br /> aida04 fault 0x15d7 : 0x161a : 67 <br /> aida05 fault 0x2f03 : 0x2f20 : 29 <br /> White Rabbit error counter test result: Passed 0, Failed 5</p> <p>Understand the status reports as follows:-<br /> Status bit 3 : White Rabbit decoder detected an error in the received data<br /> Status bit 2 : Firmware registered WR error, no reload of Timestamp<br /> Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR</p> <p>Avg ring Pressure = 5.5E-10 mbar</p> <p>16:45</p> <p>Temperature setpoint = 113 K</p> <p>Target density is OK for now. S1 vaies between 2E-8 and 3E-8 mbar. E4 between 1E-9 and 1E-8 mbar.</p> <p>Detector motors functioning well. Moving between 23.1 mm and 67.43mm. Move in and move out counters the same. Correlation scalar 8 for detectors moving is seen on aida1</p> <p>Rutherford rate peak varies between 10^3 peak height when fully in and ~10^2 when fully out. No peak from halo seen in rate.</p> <p>Beam intensity ~ 1E8</p> <p>Merger OK</p> <p>Data rate ~ 1300 kb/sec</p> <p>Temperatures OK</p> <p>Leakage current ~3.205 uA</p> <p>System chacks OK - wr fail</p> <p> Base Current Difference<br /> aida01 fault 0xab60 : 0xaba3 : 67 <br /> aida02 fault 0x88d3 : 0x8914 : 65 <br /> aida03 fault 0x23aa : 0x23ed : 67 <br /> aida04 fault 0x15d7 : 0x161a : 67 <br /> aida05 fault 0x2f03 : 0x2f20 : 29 <br /> White Rabbit error counter test result: Passed 0, Failed 5</p> <p>Understand the status reports as follows:-<br /> Status bit 3 : White Rabbit decoder detected an error in the received data<br /> Status bit 2 : Firmware registered WR error, no reload of Timestamp<br /> Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR</p> <p>Avg ring pressure ~ 4.4 E-10 mbar</p> <p>Statistics similar to previous check.</p> <p> </p></td> </tr> </tbody> </table> </p><p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown