AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Apr 5 22:16:47 2025
Author
*
:
Subject
*
:
<p> <table width="98%" align="center" cellspacing="1" style="border:1px solid #486090;"> <tbody> <tr> <td cellpadding="3px" style="background-color:#486090; font-weidht:bold; color:white;">Quote:</td></tr> <tr> <td cellpadding="10px" style="background-color:#FFFFB0;"><p>The detectors were moved into the beam axis using the motors to check the maximum distance they can be moved in without collision with one another. </p> <p>Movement of both pneumatic motors results in a separation of ~ 4 cm between the detectors.</p> <p>The servo motors for left and right were each moved in by 1 cm -> results in separation of 2 cm between the detectors</p> <p>The servo motors for left and right were then each moved in by 5 mm -> results in separation of 1 cm between the detectors</p> <p>The separation between the jacking plate of one of the detectors and the side of the adjacent detectors is closer than the separation of the detector silicons. The detectors could not be moved in any further than this to avoid collisions from the jacking plate</p> <p>Attached are photos after movement of the detectors. Parallax may affect the distance on the ruler in the photos. </p> <p>During beam time -> Maximum distance that can be moved on the servo motors is 30 mm combined for left and right. (15 mm left and right or 10 mm left, 20mm right etc) </p> <p> </p></td> </tr> </tbody> </table> </p><p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown