AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Apr 4 17:18:09 2025
Author
*
:
Subject
*
:
<pre> 10:30 IE514 1.80e-08mbar</pre> <p>Most of the CARME is covered by the baking tent. The tent needs to be closed and a bit covered from the front (upstream), end (downstream), and bottom side. TCs are labeled with a marker in the sequence 1-1 to 2-8.</p> <pre> 1-1 Internal TC 1 1-2 Internal TC 2 1-3 Internal TC 3 1-4 CARME front top 1-5 CARME front bottom 1-6 Top hanging middle 1-7 CARME middle middle 1-8 CARME middle bottom 2-1 CARME middle top 2-2 CARME back middle 2-3 Elbow 2-4 Valve 2-5 Magnet pipe 2-6 CARME back top 2-7 CARME back float 2-8 CARME back bottom</pre> <p>Also, TC extensions would be needed to connect to TC-8 modules.</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown