AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Thu Aug 10 07:51:43 2023
Author
*
:
Subject
*
:
<p>09/08/23</p> <p>Attached is the current pumpdown plot taken from grafana. </p> <p>I have started to re-work the baking tent in order to close gaps from its initial installation. The heaters work and were tested to a temperature of 50C. Testing is required to gauge the heater temperature required to heat the baking volume, we suspect the heaters will be several hundred degrees. </p> <p>11/08/23</p> <p>Baking tent has been fully constructed again, see photos attached. Some thermocouples have been re-positioned, new thermocouples positions are given in elog 433. GSI ion pump cable has been connected. Roughing pump on the outside of the berylium window has been connected and berylium window is at < 10 mbar. </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
current-pump-down.png
Original size: 640x480
Attachment 2:
20230812_120951.jpg
Original size: 4000x3000
Attachment 3:
20230812_120925.jpg
Original size: 4000x3000
Attachment 4:
20230811_152942.jpg
Original size: 4000x3000
Attachment 5:
20230811_152926.jpg
Original size: 4000x3000
Attachment 6:
20230811_152923.jpg
Original size: 4000x3000
Attachment 7:
20230811_152918.jpg
Original size: 4000x3000
Attachment 8:
20230811_152913.jpg
Original size: 4000x3000
Attachment 9:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown