ELOG CARME

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

CARME

Fields marked with * are required
Entry time:	Tue Dec 16 15:05:51 2025
Author*:
Subject*:
> (30 August 2021) > > The current state of YR09 is as per attach 1. CCC has been removed, but additional pumps and gauges remain. Some > will have to be mounted on CARME. Dismounting is scheduled for this Wed. > > CB and RSS have been preparing for CARME to be mounted. JM supplied pictures of mounting process in DL. Attach 2-5. > > 2: Studs on carriages > 3: CARME feet > 4: Back foot > 5: Elbows support > > All components required have been located in the boxes except > > - Cap hex bolts (M4 x 12?) to mount studs on carriages > - Plastic rails to remove cariages (a solution with bubble-wrap was found. Extra carriages are now in a box. Do > not turn it around.) > - Baking tray does not fit with carriages. Unclear how it did before. Will try to file down edges today. > - Bolts for CARME feet are of rather poor quality, and a host of different sizes. We may have to buy some, but > unclear what length. > - Studs are of different heights. That was not clear from previous pictures (attach 6) > - New and improved valve/elbow support (attach 7) is aligned worse than old one. Will keep using old one. Should > still work somehow. Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.3-7933898