AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Tue Jun 4 19:19:26 2024
Author
*
:
Subject
*
:
1) STOP DAQ [workspace 2, display 1, browser tab 'Run Control'] all FEE64s should change status from 'going' to 'stopped' *except* whichever FEE64(s) have a problem - typically their status is 'going' or 'error' 2) Restart Merger by selecting the Merger icon [workspace 3, display 2] terminal window showing the startup will popup 3) Setup Merger by selecting 'SETUP' [workspace 3, display 1, browser tab 'NewMerger Control'] 4) Start Merger by selecting 'GO' [workspace 3, display 1, browser tab 'NewMerger Control'] all data links will be inactive (red) 5) Disable data transfer by selecting 'Data transfer Disable #1 all' [workspace 2, display 1, browser tab 'Run Control'] 6) Start DAQ Start DAQ by selecting 'GO' [workspace 2, display 1, browser tab 'Run Control'] check that DAQ is *actually* going - if not repeat 'GO' 7) Check WR timestamps by selecting 'Collect all timestamps' [workspace 2, display 1, browser tab 'GSI White Rabbit Control'] readout times will be displayed for each FEE64 check that the readout times are monotonically increasing as you read down the list of readout times - if not, contact expert support 8) Stop DAQ Start DAQ by selecting 'STOP' [workspace 2, display 1, browser tab 'Run Control'] check that DAQ has *actually* stopped - if not repeat 'STOP 9) Enable data transfer to Merger and TapeServer and start DAQ Enable data transfer by selecting 'Enable data transfer Enable #1 All' [workspace 2, display 1, browser tab 'Run Control'] Start DAQ by selecting 'GO' [workspace 2, display 1, browser tab 'Run Control'] check that DAQ is *actually* going - if not repeat 'GO' 10) Check data is being transferred to Merger and TapeServer Select 'Reload' [workspace 3, display 1, browser tab 'NewMerger Control'] you should see a non-zero 'current merged data rate' and all links should show as green at least some of the time (requires observation over several reloads) Select 'Reload' [workspace 3, display 1, browser tab 'TapeServer'] you should see 'Blocks written' and 'kb written' counters increase 11) Check AIDA data is being forwarded from the TapeServer to MBS [workspace 3, display 2, command terminal] 12) Restart should now have been successfully completed. Please inform the 'on shift' crew' that AIDA is forwarding data. If not, please request expert assistance.
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown