AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Mon Mar 31 13:21:59 2025
Author
*
:
Subject
*
:
<p><strong>06:45</strong></p> <p>All system checks OK</p> <p>Target density 3.4e11</p> <p><strong>11:50</strong></p> <p>System checks OK.</p> <p>No beam in the ring yet. Althoug some injection may be taking place at low intensities</p> <p>Target density appears much more stable than before.</p> <p>Density currently just above 1e11 at/cm2</p> <p>Note maintanace is required to appc025 so anydesk is currently down.</p> <p> </p> <p><strong>13:13</strong></p> <p>Merger OK, Tape server OK</p> <p>ADC data item statistics looks as before. OK</p> <p>FEE temperatures look OK</p> <p>System checks OK</p> <p>Leakage current stable</p> <p>Attachments 1-5 (also waveforms)</p> <p> </p> <p><strong>15:00</strong></p> <p>Merger OK, Tape server OK</p> <p>ADC data item statistics DO NOT looks as before. NOT OK</p> <p>FEE temperatures look OK</p> <p>System checks OK</p> <p>Leakage current stable</p> <p>Attachments 6-8</p> <p><strong>15:16</strong></p> <p>Notice the statistics for aida01-aida04 (DDSD 0, top left) were counting extremely high in the previous check (attachment 6). Previous rate was 0-1 counts.</p> <p>We tried ASIC check load three times but not effect on the rate.</p> <p>We then tried 'shaking the detectors' by moving the left pneumatic in and out again.</p> <p>Rates go back to normal levels (0-1 counts)</p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown