AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Mon Mar 31 13:09:15 2025
Author
*
:
Subject
*
:
<p> <table width="98%" align="center" cellspacing="1" style="border:1px solid #486090;"> <tbody> <tr> <td cellpadding="3px" style="background-color:#486090; font-weidht:bold; color:white;">Quote:</td></tr> <tr> <td cellpadding="10px" style="background-color:#FFFFB0;"><p><strong>RUN 46- started at 00:50</strong></p> <p>Horizontal beam position = 4.0 mm, vertical beam position = -5.0 mm.</p> <p>Detectors are Left arm OUT = 36.64, right arm IN = 64.60 mm</p> <p>Injection at ca. 6E7</p> <p>Target density 6-7E9</p> <p>-----</p> <p><strong>00:51</strong></p> <p>Merger OK, Tape server OK</p> <p>ADC data item statistics looks as before. OK</p> <p>FEE temperatures look OK</p> <p>System checks OK</p> <p>Leakage current stable</p> <p>Attachments 1-2</p> <p><strong>01:19</strong></p> <p>Attachments 3-4 waveforms. DSSD0 stats fine</p> <p><strong>01:33</strong></p> <p>DSSD0 stats fine</p> <p>Attachments 5-6 spectra and xy, but I am not sure at which time these are cause I am stupid and apparently the AIDAsort code was not running....</p> <p><strong>01:56</strong></p> <p>Restarted the AIDAsort code and noted that<em><strong> stats in DSSD0 were bad again. Another shake.</strong></em> This time no change to the beam on my side.</p> <p><strong>2:43</strong></p> <p>All checks fine. Attachments 7-10 (also spectra)</p> <p><strong>4:01</strong></p> <p>Notice <em><strong>stats on DSSD0 went bad again</strong></em>. Attachment 11. Gave detector a shake.</p> <p>Now all system checks OK (Attachements 12-14)</p> <p><strong>4:19</strong></p> <p>Just noticed target is oscillating a bit, hitting 1E10. I moved it further in X and Y. Seems to not go below 6E9 in any case.</p> <p>NOTE: target was on at x=-19899 y=500.</p> <p><strong>5:17</strong></p> <p>Merger OK, Tape server OK</p> <p>ADC data item statistics looks as before. OK</p> <p>FEE temperatures look OK</p> <p>System checks OK</p> <p>Leakage current stable</p> <p>Attachments 15-18 (also waves)</p> <p><strong>5:53</strong></p> <p>Notice <em><strong>stats on DSSD0 went bad again</strong></em>. Gave detector a shake.</p> <p><strong>6:10</strong></p> <p>Stats ok in attachment 19, but</p> <p>Noticed DSSD3 has started to get only a fate of 140 nstead of previous 5500is (similar to what DSSD2 has done earlier- see previous elog). Attachment 20 for the rates.</p> <p>I have therefore made the Check ASIC control test from the ASIC control tab- attachment 21 with results.</p> <p>DSSD3 back to normal operations - attachment 22</p></td> </tr> </tbody> </table> </p><p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown