AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 07:36:40 2025
Author
*
:
Subject
*
:
<p><strong>11:13</strong></p> <p>ML enabled ring signals remotely.</p> <p>Used FakeMotion.dat (read FakeMotion.dat from InteractiveMotion.x).</p> <p>Started run 50.</p> <p> </p> <p>Cooler voltage moved up by 0.1 V. Did not refocus.</p> <p>Setpoint = 244.4 V</p> <p>Read = 243.85 V</p> <p>Collector current = 4.3 mA</p> <p> </p> <p>Target thickness 3.4E11 atoms/cm2 now stable</p> <p>Injection 1-4E7 ions</p> <p> </p> <p>Realised motors were not in.</p> <p>Moved detectors in (36.54 / 64.60 mm)</p> <p>Started run 51. Ignore run 50.</p> <p> </p> <p><strong>11:46</strong></p> <p>Realised the left half of DSSD BL was not counting. Checkloaded. Fixed it.</p> <p> </p> <p><strong>12:00</strong></p> <p>Fire alarm? Stopped later. EM thinks it is a test.</p> <p> </p> <p><strong>13:00</strong></p> <p>Run continues.</p> <p>Rates OK. Merger OK. Writing to disk back to 200 kB/s. Nothing changed, reasons unclear.</p> <p>FakeMotion.dat continues</p> <p>System wide checks as before</p> <p>Temperatures OK</p> <p> </p> <p><strong>13:36</strong></p> <p>Beam lost. Called HKR. Detectors out. Run continues. FakeMotion stopped</p> <p><strong>14:09</strong></p> <p>Beam is back. Detectors back in. FakeMotion.dat restarted.</p> <p> </p> <p>15.10 High rates observed aida01-auida04 ( c. 250k/FEE64)</p> <p> Cycled Left Servo</p> <p> Rates normal</p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown