14:45

New run 55 with:

Right arm at 64.60 mm

Left arm IN at 36.54 mm

MBS working - hopefully

Target 7E11

Injection ca. 5E7

horizontal beam position 8.75 mm

vertical beam position  -5mm

Changed electron cooler set point to 244.2 V

Read value 243.66 V

Collector current 4.31A

Rates OK. Temps OK.

15:00

Detector 0 was noisy. Shook arm. Fixed it.

16:15

Detector 0 was noisy. Shook arm. Fixed it.

There is no beam in CRYRING since 16:05.

16:25

The beam is back but it is still a bit unstable and the operators are still trying optimize it.

17:20

We just did standard detector/electronics checks. Everthing looks OK.

17:50

Take screenshots.

20:50

Detector 0 was noisy. Shook arm. Fixed it.

But now detector 2 seems to have lost the Rutherford peak.

Screenshots taken and attached.

21:05

We did "Check ASIC Control" following Carlo's advise. This fixed the detector 2, but the detector 0 got noisy again. Another movement of the detector fixed the noise again.

22:15

Detector 0 was noisy. Shook arm. Fixed it.

23:05

This run has finished. The cooler voltage will be increased by 0.1V for the next run.

The latest spectra and detector/DAQ status are in the attachment.