AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40
  CARME  ELOG logo
Message ID: 643     Entry time: Sun Jun 16 22:40:11 2024
Author: JM 
Subject: Target overlap test - R81 

23:10

Beam set to bunched mode to observe beam lifetime. 

Electron cooler voltage setpoint kept at 246.8 V. Note this is 0.5 V lower than the previous test where the setpoint was 247.3 V

This corresponds to ~13.5 keV in the beam energy.

Attachment 1 shows target scan. Maximum still observed at a horizontal beam position of 1.0 mm.

Moving 0.5 V up or down does not impact the orbit enough to shift the beam position off the target.

Beam lifetime off target seems larger than previous, perhaps better vacuum conditions?

Back to coasting beam

Attachment 1: Beam-overlap-updated2.png  124 kB  Uploaded Sun Jun 16 23:48:22 2024  | Hide | Hide all
Beam-overlap-updated2.png
ELOG V3.1.4-unknown