<p>17:20</p>
<p>(Run 87 Junk and Run 88 does not exist)</p>
<p>Beam charge state set to 5+. Energy is ~1.06 MeV/u</p>
<p>Cooler voltage setpoint 590.3 V.</p>
<p>FC20 read value 589.07 V.</p>
<p>Right arm at 64.60 mm</p>
<p>Left arm IN at 36.54 mm</p>
<p>FakeMotion script running</p>
<p>horizontal beam position 3.5 mm (new overlap position with new beam)</p>
<p>vertical beam position 0.0 mm</p>
<p>Beam intensity 7.0e+6 particles.</p>
<p>Target density ~5e11 at/cm2</p>
<p>Beam is stored in the ring for ~20 seconds. From beam overlap tests ~ 75% of the beam is destroyed in this time.</p>
<p>Beam halo appears slightly reduced. This may be due to reduced intensity and reduced injection rate (20 s vs 5s previously)</p>
<p> </p>
<p><strong>18:00</strong></p>
<pre>
FEE64 temperatures OK
ADC data item stats OK
per FEE64 Rate spectra OK
Beam intensity 1.17e+7 particles
Target density ~5.25E11 atoms/cm2</pre>
<p> </p>
<p><strong>20:28</strong></p>
<pre>
FEE64 temperatures OK
ADC data item stats OK
per FEE64 Rate spectra OK
Beam intensity 1.08e+7 particles
Target density ~3.84E11 atoms/cm2</pre>
<p> </p>
<p><strong>23:58</strong></p>
<p>Temps OK. Stats OK. Merger OK. Write to disk OK.</p>
<p>Waveforms attached.</p>
<p>Beam keeps going away due to "solenoid" issues.</p>
<p>On-line analysis screenshots attached.</p>
<p>Without beam, we see a clear noise spike in all detectors every 50-200 seconds randomly. This is *not* correlated with beam injection or dump.</p>
<p>Checkloaded - no effect. Beam back - no changes.</p> |