AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sun Apr 6 14:21:53 2025
Author
*
:
Subject
*
:
- water flow/interlock checks check water flow to/from inflow/outflow manifolds check all coolant lines to all FEE64s are connected check USB-controlled ac mains relay 'water' LED illuminated water flow and dew point sensor interlocks OK - carme-gsi network cabling from patch panel YR10/2 yellow network cable to carme-gsi operating in 19" rack room (2.033) green network cable to carme-gsi operating in counting room (2.034) - boot carme-gsi systemctl start dhcpd start DHCP dynamic network configuration ssh -L 8080:proxy.gsi.de:8080 carme@atppc025 establish proxy port for AnyDesk access ssh -X pi@nnrpi1 /MIDAS/TclHttpd/linux-arm/TclHttpd-server & start MIDAS server ssh -X pi@nnrpi1 ./caen_screen.sh start CAEN N1419ET control interface - enable current logging open a new terminal ssh pi@nnrpi1 cd Programs/caenlogger caenlogger --config caenlogger_config_gsi.toml open a new terminal cd Programs/caenlogger gnuplot plot_current.gp - system log sudo tail -f /var/log/messages monitor system log e.g. filesystem mounts for FEE64 embedded processors (sudo does not work - use su instead. will have to fix) - FEE64 power ON Start browser on nnrpi1:8015 Power On - Start MIDAS select server start icon (leftmost) 1x terminal session will appear Start browser tab localhost:8015 Data Acquisition Control Services Update (nothing should change) Act on all Data acquisition server TICKED RESET SETUP Enable histograms and waveforms Open ASIC control Act on all FEE64 modules Act on all ASICS System functions -> Check ASIC control Check FEE64 temperatures (Reload) System wide checks Clock ADC Calibration White Rabbit Drop down -> collect FPGA errors Check FPGA Synchronise ASIC clocks FADC Align & Check - all FEE64s Drop down -> calibrate ADCs System wide checks Clock ADC calibration If any FEE fails, FADC calibrate it again DAQ GO WR timestamp check WR timestamp monotonically increases aida01->aida16 To startup Merger and Tape Server DAQ STOP 8115 server, tape server, merger -> from buttons on top 3x terminal sessions will appear Start browser tab localhost:8115 New Merge control Tape Service NetVar Service Merger tab (top) setup go (ignore error message) enable output to data storage Merger State = GOing : merge/running : xfer Links => Merger => Storage tape server Inquire Available Devices Allocate Device Enter volume name (if already defined) Mount volume Reload Set run number Open file Open a new terminal Navigate to /TapeData/ and the volume name watch ls -lht Enable data transfer #1 (in Run Control) X should appear next to every FEE Check netvar variable NetVar.MERGE.RunOptions = 1 DAQ GO check merger rate and activity of all FEE64s check tape server blocks written number is increasing Server state -> Go
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.3-7933898