AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Mon Mar 31 13:06:07 2025
Author
*
:
Subject
*
:
> Found CARME pressure at 2E-7 mbar > > Raspberry pi took pictures until 4 am and > then lost contact with camera. Reasons > unclear. Plugging camera in / out solved > the issue. Will have to be investigated > if it happens again. > > Left list of things to do with RSS. In > particular: > - Install xhv feedthrough and > thermocouples. Prepared on desk > - Install blocking pin in right hand motor > after pressure returns to atmosphere > - Cover bellows with aluminium to protect > from fibreglass when mounting tent > eventually > - Check all parts available for detector > supports with mounting sketch Peter sent ( > RSS to recover sketch) > - Investigate baking program logging. > Unclear if logging is working - did we > disable it for some reason? > > Valve on scroll closed. Scroll off. Turbo > off. Pressure sensors off. Raspberry pi > off. > > Activities to resume on 16 September. > > > > Attached are the pumping down plots > start point: 10.09.2021 19:00 > end point: 11.09.2021 16:00 > > > > 10.09.2021 19:00 1.09e-6 > 10.09.2021 20:00 7.57e-7 > 10.09.2021 21:00 6.17e-7 > 10.09.2021 22:00 5.36e-7 > 10.09.2021 23:00 4.82e-7 > 11.09.2021 00:00 4.42e-7 > 11.09.2021 01:00 4.10e-7 > 11.09.2021 02:00 3.84e-7 > 11.09.2021 03:00 3.62e-7 > 11.09.2021 04:00 3.43e-7 > 11.09.2021 15:00 2.29e-7 > 11.09.2021 16:00 2.31e-7
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown