AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Nov 8 23:16:54 2025
Author
*
:
Subject
*
:
<p><strong>Run 27 running</strong></p> <p>28/05/2025</p> <p>(ignore 26 - in-between run)</p> <p>We start a new run with real data taking condititon: beam is ok, target density is 9.6e11 cm-2, detectors are moving in-out periodically.</p> <p>Cooler voltage setpoint 1128 V.</p> <p>Beam energy = 1.99 MeV/u (from HKR) (same as run 25)</p> <p>Left arm at 18.86 mm</p> <p>Right arm IN at 83.69 mm (OUT 37.96 mm)</p> <p>vertical beam position 0.0 mm</p> <p>horizontal beam position -3.5mm</p> <p>Beam intensity ~1e+7 particles.</p> <p>Target density ~9.6e11 at/cm2</p> <p>Target temperatures: T1=31.5 K T2=35.2 K</p> <p>Beam cycle set to 10 seconds.</p> <p>11;57</p> <p>All checks OK.</p> <p>Aida10's rates seems low now, but aida07 is instead jumping between 200 and 4000 following beam.</p> <p> </p> <p>15:45</p> <p>Root histograms refreshed.</p> <p> </p> <p>Temps OK - attach</p> <p>Stats OK - attach</p> <p>All checks OK</p> <p>Leakage OK - attach</p> <p><br /> Base Current Difference<br /> aida01 fault 0x0 : 0x1 : 1 <br /> FPGA Timestamp error counter test result: Passed 15, Failed 1<br /> If any of these counts are reported as in error<br /> The ASIC readout system has detected a timeslip.<br /> That is the timestamp read from the time FIFO is not younger than the last</p> <p> </p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.3-7933898