AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri May 30 20:47:47 2025
Author
*
:
Subject
*
:
<p>21:47</p> <p>Run 36 started.</p> <p>D+ beam deuterium target. D+ beam energy is 2 MeV/u.</p> <p>Target density is about 1.6e12 at/cm2. FLuctuations between 1e12 and 1e13 at/cm2.</p> <p>Detectors are now IN with the servo motors only. Detectors are stationary.</p> <p>Left potentiometer = 36.54 mm</p> <p>Right potentiometer = 37.96 mm</p> <p>Ring cycle time is 1 minute. Note we see some hydrogen in in the spectrum, this disapears after a few seconds.</p> <p>Target T1=30K, T2=31.9K.</p> <p>Nozzle position x=-3.12, z=1.72 mm</p> <p>YR09-Etarget pressure = 2.29e-10 mbar.</p> <p>Cooler set value = 1126V, 15 mA. Read value = 1068V, 13.22 mA</p> <p>Detector 4 is still a bit unstable in its leakage current but the data coming through looks good. Some crap is periodically written to disk when leakage current spikes.</p> <p>We will run like this for an hour then move detectors back out for overnight run.</p> <p>after 1 hour of beamtime we stop.</p> <p>Attachment 1 - xy plot</p> <p>Attachment 2 - energy histogram NUCLEAR</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Screenshot_from_2025-05-30_22-45-48.png
Original size: 1920x1014
Attachment 2:
Screenshot_from_2025-05-30_22-46-48.png
Original size: 1920x1014
Attachment 3:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.3-7933898