AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CARME
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Dec 31 22:01:59 2025
Author
*
:
Subject
*
:
<p>23:00 DAQ restored and data now being written okay. Checks all okay, see screenshots below. Histograms reset. 40 bars in bottle @ 23:45 - should last 30 hours.</p> <p>12:00 Checks all ok. No problems with aidas or writing to disk.</p> <p>01:10 Checks all ok.</p> <p>02:05 Checks all ok. See attatchment 6 for peak update after reset histograms 3 hours prior. Target okay, dropped a little to 6e12 but seems to be going up itself. Will monitor and then move position if needed.</p> <p>03:10 During checks, noticed detector 4 had tripped so turned it off. Writing to disk increased alot, statistics increased to alost 250000. Put aida13-16 in low/medium energy. Started new run. (see attatchment 7-14 for before and afters)</p> <p>RUN 91</p> <p>03:15 Checks all ok after turning off detector 4. Moved target around and got abit more density but x is very sensitive and y did not seem to do much. Density 5.5e12.</p> <p>04:30 Checks all ok. Target decreasing in density - monitoring it.</p> <p>04:35 Target density back up to 1e13 after moving in y.</p> <p>05:30 Checks all ok. Target density decreased slightly to 8e12</p> <p>06:30 Checks all ok, target density stable for past hour</p> <p>07:30 Checks all ok</p> <p>08:30 Checks all ok, target density at 1e13 for past two hours</p> <p>09:00 Run stopped</p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.3-7933898