AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CIRCE
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Thu Aug 14 12:24:19 2025
Author
*
:
Subject
*
:
<p> <table width="98%" align="center" cellspacing="1" style="border:1px solid #486090;"> <tbody> <tr> <td cellpadding="3px" style="background-color:#486090; font-weidht:bold; color:white;">Quote:</td></tr> <tr> <td cellpadding="10px" style="background-color:#FFFFB0;"><p>The PB-5 Pulse Generator settings are as follows:</p> <p>Fall Time = 100us</p> <p>Rate = 2.00Hz</p> <p>Delay = 250ns</p> <p>Ampl = 0.50000V</p> <p>Pol = POS</p> <p>Pulse Top = Tail</p> <p>Atten = 1X</p> <p>PB-5 Pulse = ON</p> <p>CLAMP = OFF</p> <p> </p> <p>During the second beam tuning on 20/02/2018 we performed two pulser walkthroughs to determine the ADC offset.</p> <p>For the walkthrough the rate was increased to 10Hz.</p> <p>The first pulser walkthough was saved as: Remote_Objs/RData_1/180220170900</p> <p>The pulser amplitudes used were: 0.1, 0.2, 0.3, 0.4, and 0.5 V</p> <p>After this walkthrough I remembered channels 24 -> 31 of ADC 2 were unplugged from the RAL shaping amplifier, and so plugged these back in. I then repeated the walkthrough.</p> <p>The second pulser walkthrough was saved as: Remote_Objs/RData_1/180220172838</p> <p>Like the first walkthrough, the pulser ampltudes were 0.1, 0.2, 0.3, 0.4, and 0.5 V.</p> <p>A sample pulser walkthough spectrum is attached.</p></td> </tr> </tbody> </table> </p><p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown