AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CIRCE
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Nov 21 08:45:03 2018
Author
*
:
Subject
*
:
<p>On 19/11/2018:</p> <p>We mounted the following in the chamber:</p> <ul> <li>Iris frames - no S2 detectors or mylar</li> <li>Si pin diode mount with 0.9um mylar - no diode</li> <li>Target ladder with blank frames - same configuration as elog entry #41</li> </ul> <p>At 15:20 we started roughing pumps Ecodry 1 and 2. We opened the manual gate valve followed by the T1600 valve.</p> <p>After reaching ~10^-2 mBar we started the following turbos:</p> <ul> <li>Up 1</li> <li>Up 2</li> <li>Down 1</li> <li>Down 2</li> <li>T1600</li> <li>Entrance 3</li> <li>CSSM</li> </ul> <p>By 15:30 the CSSM turbo had reached 56 krpm operating speed and the Up and Down turbos had reached 833 Hz operating speed.</p> <p>At 19:51 just before we left the lab the pressures read, in mBar:</p> <ul> <li>TPU1 = 3.7e-6</li> <li>TPU2 = 6.9e-7</li> <li>TPD1 = 1.0e-6</li> <li>TPD2 = 1.2e-6</li> <li>CHUP = 6.0e-6</li> <li>CHDW = 1.4e-5</li> </ul> <p> </p> <p> </p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown