AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
CRIB
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Wed Feb 22 14:06:47 2017
Author
*
:
Subject
*
:
<p>Today we took datas of NaI detectors one by one for calibration. The gamma ray source was put on the NaI surfaces so that peaks could clealy appear where we expected.</p> <p>We fitted them with gaussian and exponential, and integrate the peaks to calculate yields. The results were pretty good. </p> <p>However, at the test experiment last year, some NaI gains gradually shifted lower and peaks moved left during the beam time. So we need to let threshold level of CFD down NaI2 and NaI3 and NaI5, or change the fast amp gain and use downscaler, otherwise the part of peaks may go down below the threshold.</p> <p>Probably NaI works have almost finished before setting up geometry I hope.</p>
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
NaICalibration_Cs137.pdf
Original size: 842x595
Attachment 2:
NaICalibration.pdf
Original size: 842x595
Attachment 3:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown