<p>On the ladder, Quartz was mounted on the bottom position. The bottom position (Quartz) is called target 1 at 0 mm, middle position (27Al target on Ta backing) is called target 2 at 50 mm, and top position (27Al target on Ta backing) is called target 3 at 100 mm.</p>
<p>On HV supply, Channel 0 is connected to Suppressor and Channel 1 is connected to Target.</p>
<p> </p>
<p>Settings on Electronics:</p>
<p>HV to NaI detector = +694 V</p>
<p>Amplifier gain x1 (internal jumper) x1.5 (fine gain) x20 (course gain)</p>
<p>Shaping time is 0.5 us</p> |