AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:38:21 2025
Author
*
:
Subject
*
:
00:00 ASIC settings 2019Dec19-16.19.51 DSSSD#1 slow comparator 0xa DSSSD#2 slow comparator 0xa DSSSD#3 slow comparator 0xd BNC PB-5 Pulser Amplitude1.0V Attenuation x1 Frequency 2Hz tau_d 1ms - polarity Delay 250ns, tail pulse 00:14 All system wide checks ok *except aida06 fails clock status 6* Statistics - attachment 1 FEE Temperatures - attachment 2 Bias and leakage currents ok - attachment 3 01:20 Can see now that we are writing to a separate drive the compression is going much faster - attachment 4 02:15 All system wide checks ok *except aida06 fails clock status 6* Statistics - attachment 5 FEE Temperatures - attachment 6 Bias and leakage currents ok - attachment 7 03:43 Beam has been lost. Not and FRS fault. Several powersupplies have tripped 04:00 Noticed more bad merge events System wide checks has also noted an FPGA error. All other system wide checks same results as previous Base Current Difference aida12 fault 0x0 : 0x1 : 1 FPGA Timestamp error counter test result: Passed 11, Failed 1 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last The following are timestamp values from each of the FEEs taken in sequence If time does not increase in a reasonable manner run the system wide checks aida01 : White Rabbit=> 166A3F29 BA0DF4D2 , WR/10=> 23DD31DC5CE3215, Readout Time => 23DD31DC6F34000 aida02 : White Rabbit=> 166A3F29 CC49ECD7 , WR/10=> 23DD31DC7A0FE15, Readout Time => 23DD31DC8428000 aida03 : White Rabbit=> 166A3F29 DF55B7E8 , WR/10=> 23DD31DC9889264, Readout Time => 23DD31DCA85C000 aida04 : White Rabbit=> 166A3F29 EECF82B7 , WR/10=> 23DD31DCB14C045, Readout Time => 23DD31DCC2B8000 aida05 : White Rabbit=> 166A3F29 FED2EFD2 , WR/10=> 23DD31DCCAEB195, Readout Time => 23DD31DCDC14000 aida06 : White Rabbit=> 166A3F2A 0EDC023D , WR/10=> 23DD31DCE49336C, Readout Time => 23DD31DCF204000 aida07 : White Rabbit=> 166A3F2A 1E8170D3 , WR/10=> 23DD31DCFD9BE7B, Readout Time => 23DD31DD10A0000 aida08 : White Rabbit=> 166A3F2A 30448F76 , WR/10=> 23DD31DD1A074BF, Readout Time => 23DD31DD2A34000 aida09 : White Rabbit=> 166A3F2A 3FE36E61 , WR/10=> 23DD31DD33057D6, Readout Time => 23DD31DD3B94000 aida10 : White Rabbit=> 166A3F2A 4E83A1F7 , WR/10=> 23DD31DD4A6C365, Readout Time => 23DD31DD46A8000 aida11 : White Rabbit=> 166A3F2A 5FD19086 , WR/10=> 23DD31DD661C1A7, Readout Time => 23DD31DD7664000 aida12 : White Rabbit=> 166A3F2A 6FE06F3D , WR/10=> 23DD31DD7FCD7EC, Readout Time => 23DD31DD9684000 04:07 Beam is back AIDA on file R6_815 Statistics - attachment 8 FEE Temperatures - attachment 9 Bias and leakage currents ok - attachment 10 ASIC check ok Multiple merge data error events observed 06:04 All system wide checks ok *except aida06 fails clock status 6* Statistics - attachment 11 FEE Temperatures - attachment 12 Bias and leakage currents ok - attachment 13 07:22 Beam noticed dropped but back quickly
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown