AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:27:47 2025
Author
*
:
Subject
*
:
> 00:00 ASIC settings 2019Dec19-16.19.51 > DSSSD#1 slow comparator 0xa > DSSSD#2 slow comparator 0xa > DSSSD#3 slow comparator 0xd > > BNC PB-5 Pulser > Amplitude1.0V > Attenuation x1 > Frequency 2Hz > tau_d 1ms > - polarity > Delay 250ns, tail pulse > > > 00:14 All system wide checks ok *except aida06 fails clock status 6* > Statistics - attachment 1 > FEE Temperatures - attachment 2 > Bias and leakage currents ok - attachment 3 > > 01:20 Can see now that we are writing to a separate drive the compression is going much faster - attachment 4 > > 02:15 All system wide checks ok *except aida06 fails clock status 6* > Statistics - attachment 5 > FEE Temperatures - attachment 6 > Bias and leakage currents ok - attachment 7 > > 03:43 Beam has been lost. Not and FRS fault. Several powersupplies have tripped > > 04:00 Noticed more bad merge events > System wide checks has also noted an FPGA error. > All other system wide checks same results as previous > > Base Current Difference > aida12 fault 0x0 : 0x1 : 1 > FPGA Timestamp error counter test result: Passed 11, Failed 1 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > The following are timestamp values from each of the FEEs taken in sequence > If time does not increase in a reasonable manner run the system wide checks > > aida01 : White Rabbit=> 166A3F29 BA0DF4D2 , WR/10=> 23DD31DC5CE3215, Readout Time => 23DD31DC6F34000 > aida02 : White Rabbit=> 166A3F29 CC49ECD7 , WR/10=> 23DD31DC7A0FE15, Readout Time => 23DD31DC8428000 > aida03 : White Rabbit=> 166A3F29 DF55B7E8 , WR/10=> 23DD31DC9889264, Readout Time => 23DD31DCA85C000 > aida04 : White Rabbit=> 166A3F29 EECF82B7 , WR/10=> 23DD31DCB14C045, Readout Time => 23DD31DCC2B8000 > aida05 : White Rabbit=> 166A3F29 FED2EFD2 , WR/10=> 23DD31DCCAEB195, Readout Time => 23DD31DCDC14000 > aida06 : White Rabbit=> 166A3F2A 0EDC023D , WR/10=> 23DD31DCE49336C, Readout Time => 23DD31DCF204000 > aida07 : White Rabbit=> 166A3F2A 1E8170D3 , WR/10=> 23DD31DCFD9BE7B, Readout Time => 23DD31DD10A0000 > aida08 : White Rabbit=> 166A3F2A 30448F76 , WR/10=> 23DD31DD1A074BF, Readout Time => 23DD31DD2A34000 > aida09 : White Rabbit=> 166A3F2A 3FE36E61 , WR/10=> 23DD31DD33057D6, Readout Time => 23DD31DD3B94000 > aida10 : White Rabbit=> 166A3F2A 4E83A1F7 , WR/10=> 23DD31DD4A6C365, Readout Time => 23DD31DD46A8000 > aida11 : White Rabbit=> 166A3F2A 5FD19086 , WR/10=> 23DD31DD661C1A7, Readout Time => 23DD31DD7664000 > aida12 : White Rabbit=> 166A3F2A 6FE06F3D , WR/10=> 23DD31DD7FCD7EC, Readout Time => 23DD31DD9684000 > > 04:07 Beam is back AIDA on file R6_815 > Statistics - attachment 8 > FEE Temperatures - attachment 9 > Bias and leakage currents ok - attachment 10 > ASIC check ok > > Multiple merge data error events observed > > 06:04 All system wide checks ok *except aida06 fails clock status 6* > Statistics - attachment 11 > FEE Temperatures - attachment 12 > Bias and leakage currents ok - attachment 13 > > 07:22 Beam noticed dropped but back quickly
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown