AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 20:00:05 2025
Author
*
:
Subject
*
:
> 08.31 DAQ continues OK - file R33_263 > > ASIC settings 2019Dec19-16.19.51 > DSSSD#1 slow comparator 0xa > DSSSD#2 slow comparator 0xa > DSSSD#3 slow comparator 0xd > > BNC PB-5 Pulser > Amplitude1.0V > Attenuation x1 > Frequency 2Hz > tau_d 1ms > - polarity > Delay 250ns, tail pulse > > 08.32 No merger server error/warning messages since most recent restart c. 00.00 today > > > 08.44 System wide checks > > FEE64 module aida09 global clocks failed, 6 > Clock status test result: Passed 11, Failed 1 > > Understand status as follows > Status bit 3 : firmware PLL that creates clocks from external clock not locked > Status bit 2 : always logic '1' > Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock > Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock > If all these bits are not set then the operation of the firmware is unreliable > > FEE64 module aida07 failed > FEE64 module aida10 failed > Calibration test result: Passed 10, Failed 2 > > If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module > > > Base Current Difference > aida05 fault 0x7a56 : 0x7a58 : 2 > aida06 fault 0x65bb : 0x65bd : 2 > aida07 fault 0xcdd1 : 0xcdd4 : 3 > aida08 fault 0x2ab3 : 0x2ab5 : 2 > White Rabbit error counter test result: Passed 8, Failed 4 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > > FPGA Timestamp error counter test result: Passed 12, Failed 0 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > aida01 : 14 6 3 2 1 2 2 3 3 4 11 : 58904 > aida02 : 6 4 1 1 1 2 2 4 2 3 7 : 39848 > aida03 : 5 6 4 2 1 3 1 3 2 3 7 : 39300 > aida04 : 4 1 2 2 3 3 2 4 1 4 15 : 73912 > aida05 : 1 5 2 2 2 4 2 3 2 3 7 : 39692 > aida06 : 7 2 2 3 1 3 3 3 2 4 7 : 41836 > aida07 : 6 3 1 2 3 2 2 3 3 3 7 : 40512 > aida08 : 8 5 2 2 1 3 1 3 2 3 7 : 39272 > aida09 : 1 2 3 1 1 3 2 3 1 4 7 : 40484 > aida10 : 2 6 3 2 1 2 2 2 3 3 7 : 39912 > aida11 : 2 3 1 0 2 4 1 3 2 3 7 : 39344 > aida12 : 2 3 4 2 0 3 3 3 2 3 7 : 39712 > > > FEE64 Temperatures OK - attachment 1 > Good event statistics OK - attachment 2 > Detector bias & leakage currents OK - attachment 3 > Merger OK - 5.1M data items/s > TapeServer OK - 16Mb/s > > 08.54 p+n junction strip HEC spectra - attachment 1 > Rate spectra - attachment 2 > > 09.15 Burst of Merger server warning messages of type > > MERGE Data Link (3547): bad timestamp 1 3 0x8128d6c8 0x05056328 0x00008d6c85056328 0x166b8d6c85056328 0x166b8d6d86da01ee > > also multiple > > Warning: At least one MIDAS block missed in relayWarning: At least one MIDAS block missed in relayWarning: At least one MIDAS block missed in relayWarning: At least one > MIDAS block missed in relayWarning: At least one MIDAS block missed in relayWarning: At least one MIDAS block missed in relayWarning: At least one MIDAS block missed in > relayWarning: At least one MIDAS block missed in relayWarning: A > > The latter may reflect downstream problems writing MBS data
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown