18.01 Pulser walkthrough at end of run S452 file S452/R57_0 ... R57_28

      ASIC settings 2019Dec19-16.19.51
      DSSSD#1 slow comparator 0xa
      DSSSD#2 slow comparator 0xa
      DSSSD#3 slow comparator 0xd

      BNC PB-5 Pulser 
      Amplitude1.0V
      Attenuation x1
      Frequency 2Hz
      tau_d 1ms
      - polarity
      Delay 250ns, tail pulse

      BNC PB-5 settings changed by terminal command line (see attachments 1, 2 & 3)
      using the commands

      set rep rate 25
      set attenuation 5
      set amplitude 10
      set amplitude 9
      :
      :
      set amplitude 1
      set attenuation 1
      set rep rate 2

      Example n+n LEC spectrum - see attachment 4

18.27 R57 ends OK file R57_28