AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Sat Mar 29 11:29:38 2025
Author
*
:
Subject
*
:
> > Two further comments > > 1) The 'pristine' Options files produced by OH fixed *all* of the undefined spectra issues, > i.e. we now have *L, *H, Rate, Stat, Hit, HitRate spectra for all FEE64s > > 2) The system has undegone 1x power cycle/reset/setup and 1x reset/setup cycle since the > new Options files were installed and we currently have 2x errors reported in aida02. > There is an open Options tab and we have viewed the Options settings for aida01 and aida02 > (currently viewing aida02) - *no* changes/saves/restores requested. > > > > > Rename Options directory > > > > mv Options Options.BAK-130421 > > > > Copy Options.PRISTINE to Options > > > > cp -r Options.PRISTINE Options > > chmod -R 777 Options > > > > Start Options directory monitor (will check directory every 5 minutes) > > > > Python ~/oh/OptionsCheck > > > > > > 17.32 Power cycle FEE64s > > > > > > FEE64 module aida09 global clocks failed, 6 > > Clock status test result: Passed 11, Failed 1 > > > > Understand status as follows > > Status bit 3 : firmware PLL that creates clocks from external clock not locked > > Status bit 2 : always logic '1' > > Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock > > Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock > > If all these bits are not set then the operation of the firmware is unreliable > > > > Calibration test result: Passed 12, Failed 0 > > > > If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module > > > > White Rabbit error counter test result: Passed 12, Failed 0 > > > > Understand the status reports as follows:- > > Status bit 3 : White Rabbit decoder detected an error in the received data > > Status bit 2 : Firmware registered WR error, no reload of Timestamp > > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > > > > > FPGA Timestamp error counter test result: Passed 12, Failed 0 > > If any of these counts are reported as in error > > The ASIC readout system has detected a timeslip. > > That is the timestamp read from the time FIFO is not younger than the last > > > > > > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 > > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > > aida01 : 3 5 2 2 1 3 3 2 2 3 8 : 43348 > > aida02 : 2 3 0 2 1 2 2 3 2 3 8 : 43424 > > aida03 : 3 4 0 1 1 2 2 3 2 3 8 : 43404 > > aida04 : 1 4 2 0 3 3 3 2 2 3 8 : 43396 > > aida05 : 1 4 2 2 2 3 3 2 2 3 8 : 43396 > > aida06 : 2 3 2 1 1 2 2 3 2 3 8 : 43424 > > aida07 : 4 1 3 3 1 3 1 3 2 3 8 : 43368 > > aida08 : 1 4 2 2 2 3 3 2 2 3 8 : 43396 > > aida09 : 2 3 3 3 2 4 2 2 2 3 8 : 43312 > > aida10 : 1 3 1 2 2 3 2 2 2 3 8 : 43116 > > aida11 : 1 3 3 1 2 3 2 2 2 3 8 : 43116 > > aida12 : 3 2 1 0 1 2 1 3 2 3 8 : 43116 > > > > > > Note that system wide checks identify 1x file of different size immediately after boot/reset/setup > > > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > > > FEE : aida01 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida02 => Options file size is 1025 Last changed Tue Apr 13 17:59:04 CEST 2021 > > FEE : aida03 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida04 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida05 => Options file size is 1014 Last changed Tue Apr 13 17:59:04 CEST 2021 > > FEE : aida06 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida07 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida08 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida09 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida10 => Options file size is 1014 Last changed Tue Apr 13 17:59:04 CEST 2021 > > FEE : aida11 => Options file size is 1014 Last changed Tue Apr 13 17:59:03 CEST 2021 > > FEE : aida12 => Options file size is 1014 Last changed Tue Apr 13 17:59:05 CEST 2021 > > > > 06:25:00 PM > > FAULTS! > > > > Unknown option in FEE2 Options database > > Unknown entry starts: > > > da_Hist_W_Enable&&TS_SYNC_PHASE&&ExtClk&&Aida.shift&&MACB_TRIG_MODE&&Aida.offset&&RunNumber&&Aida_GroupBase&&Rate.channels&&Stat.channels&&Aida.Vchannels&&ASIC.settings&&WAV > E_DMA_HWM&&Ai > > da_Hist_D_Enable&&Stat.shift&&Aida.Wchannels&&Aida_Hist_V_Enable&&Include.Aida&&Aida.channels&&DataAcqPgm&&Aida_Hist_H_Enable&&DataFormat&&ASIC_DMA_HWM&&Aida_Hist_L_Enable > > > > 06:30:00 PM > > FAULTS! > > > > Unknown option in FEE2 Options database > > Unknown entry starts: > > > da_Hist_W_Enable&&TS_SYNC_PHASE&&ExtClk&&Aida.shift&&MACB_TRIG_MODE&&Aida.offset&&RunNumber&&Aida_GroupBase&&Rate.channels&&Stat.channels&&Aida.Vchannels&&ASIC.settings&&WAV > E_DMA_HWM&&Ai > > da_Hist_D_Enable&&Stat.shift&&Aida.Wchannels&&Aida_Hist_V_Enable&&Include.Aida&&Aida.channels&&DataAcqPgm&&Aida_Hist_H_Enable&&DataFormat&&ASIC_DMA_HWM&&Aida_Hist_L_Enable > > > > Unknown option in FEE2 Options database > > Unknown entry starts: > > > et&&Aida_Hist_W_Enable&&TS_SYNC_PHASE&&ExtClk&&Aida.shift&&MACB_TRIG_MODE&&Aida.offset&&RunNumber&&Aida_GroupBase&&Rate.channels&&Stat.channels&&Aida.Vchannels&&ASIC.setting > s&&WAVE_DMA_H > > > WM&&Aida_Hist_D_Enable&&Stat.shift&&Aida.Wchannels&&Aida_Hist_V_Enable&&Include.Aida&&Aida.channels&&DataAcqPgm&&Aida_Hist_H_Enable&&DataFormat&&ASIC_DMA_HWM&&Aida_Hist_L_En > able > > > > > > > > > > > > FEE64 module aida01 => 7 > > FEE64 module aida02 => 7 > > FEE64 module aida03 => 7 > > FEE64 module aida04 => 7 > > FEE64 module aida05 => 7 > > FEE64 module aida06 => 7 > > FEE64 module aida07 => 7 > > FEE64 module aida08 => 7 > > FEE64 module aida09 => 7 > > FEE64 module aida10 => 7 > > FEE64 module aida11 => 7 > > FEE64 module aida12 => 7 > > > > > > ASIC Clock Timestamp check test result: Passed 12, Failed 0 > > > > > > If any of the above values are different from the rest then check the clocks and the White Rabbit decoder status > > > > > > > > > > aida01 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida02 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida03 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida04 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida05 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida06 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida07 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida08 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida09 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida10 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida11 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > aida12 timestamp memory No stop found : 0x0 > > 0 0 0 0 0 > > 4 0 0 0 0 > > 8 0 0 0 0 > > 12 0 0 0 0 > > 16 0 0 0 0 > > 20 0 0 0 0 > > 24 0 0 0 0 > > 28 0 0 0 0 > > > > 17.14 rate spectra - attachment 1 > > > > 1.8.L spectra - attachments 2 & 3 > > pulser peak width aida06 c.75 ch FWHM, aida07 c.85 ch FWHM > > > > 1.8.W spectra - attachments 4 & 5 > > > > good events statistics (slow comparator 0xa) - attachment 6 > > > > FEE64 temperatures OK - attachment 7 > > > > DSSSD bias & leakage currents OK - attachment 8 > > > > > > > > > > 17.38 DAQ starts file NULL/R14 > > slow comparator 0xa -> 0x64 > > BNC PB-5 pulser OFF > > alpha background > > > > 10:40 CET 14.04.2021 - NH > > Close file NULL/R14
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Attachment 1:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown