ELOG DESPEC

AIDA GELINA BRIKEN nToF CRIB ISOLDE CIRCE nTOFCapture DESPEC DTAS EDI_PSA 179Ta CARME StellarModelling DCF K40

DESPEC

Fields marked with * are required
Entry time:	Sat Mar 29 11:27:56 2025
Author*:
Subject*:
> > 13.28 System wide checks > > Clock status test result: Passed 12, Failed 0 > > Understand status as follows > Status bit 3 : firmware PLL that creates clocks from external clock not locked > Status bit 2 : always logic '1' > Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock > Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock > If all these bits are not set then the operation of the firmware is unreliable > > Calibration test result: Passed 12, Failed 0 > > If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module > > Base Current Difference > aida01 fault 0x44c2 : 0x44c5 : 3 > aida02 fault 0xc81f : 0xc822 : 3 > aida03 fault 0x9342 : 0x9344 : 2 > aida04 fault 0xdb3f : 0xdb41 : 2 > aida05 fault 0x4baf : 0x4bb3 : 4 > aida06 fault 0xd2a4 : 0xd2a8 : 4 > aida07 fault 0xc51c : 0xc51f : 3 > aida08 fault 0xe853 : 0xe856 : 3 > aida09 fault 0x5212 : 0x5216 : 4 > aida10 fault 0xf81d : 0xf81f : 2 > aida11 fault 0x810 : 0x812 : 2 > aida12 fault 0xa279 : 0xa27a : 1 > White Rabbit error counter test result: Passed 0, Failed 12 > > Understand the status reports as follows:- > Status bit 3 : White Rabbit decoder detected an error in the received data > Status bit 2 : Firmware registered WR error, no reload of Timestamp > Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR > > > Base Current Difference > aida09 fault 0x0 : 0x5 : 5 > aida12 fault 0x0 : 0xc : 12 > FPGA Timestamp error counter test result: Passed 10, Failed 2 > If any of these counts are reported as in error > The ASIC readout system has detected a timeslip. > That is the timestamp read from the time FIFO is not younger than the last > > > Returned 0 0 0 0 0 0 0 0 0 0 0 0 > Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k > aida01 : 57 33 12 15 3 3 3 2 3 2 6 : 35276 > aida02 : 15 3 5 2 1 4 1 3 3 3 6 : 36388 > aida03 : 13 4 2 1 4 3 1 3 3 3 6 : 36372 > aida04 : 21 5 2 1 2 4 4 2 3 3 6 : 36668 > aida05 : 10 5 6 3 2 3 3 3 1 4 6 : 36880 > aida06 : 22 12 1 0 3 3 1 3 3 3 6 : 36360 > aida07 : 19 3 3 0 3 3 2 4 1 4 6 : 37076 > aida08 : 21 6 2 4 2 3 1 3 3 3 6 : 36388 > aida09 : 2 7 5 3 2 4 2 3 2 3 6 : 35696 > aida10 : 7 3 1 3 1 3 3 3 2 3 6 : 35684 > aida11 : 1 2 1 3 2 5 2 2 3 3 6 : 36228 > aida12 : 17 10 4 2 3 2 2 4 2 3 6 : 36052 > > > > Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same > > FEE : aida01 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida02 => Options file size is 2114 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida05 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 > FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 > FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 > FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 > > 13.30 Output of ~/oh/OptionsCheck.py > > 02:25:00 PM > FAULTS! > > Unknown option in FEE2 Options database > Unknown entry starts: > et&&Aida_Hist_W_Enable&&TS_SYNC_PHASE&&ExtClk&&Aida.shift&&MACB_TRIG_MODE&&Aida.offset&&RunNumber&&Aida_GroupBase&&Rate.channels&&Stat.channels&&Aida_Hist_D_Enable&&WAVE_DMA_HWM&&ASIC.se > ttings&&Aida.Vchannels&&Aida.Wchannels&&Stat.shift&&Aida.channels&&Include.Aida&&Aida_Hist_V_Enable&&DataFormat&&Aida_Hist_H_Enable&&DataAcqPgm&&ASIC_DMA_HWM&&Aida_Hist_L_Enable > > Unknown option in FEE2 Options database > Unknown entry starts: > da_Hist_W_Enable&&TS_SYNC_PHASE&&ExtClk&&Aida.shift&&MACB_TRIG_MODE&&Aida.offset&&RunNumber&&Aida_GroupBase&&Rate.channels&&Stat.channels&&Aida.Vchannels&&ASIC.settings&&WAVE_DMA_HWM&&Ai > da_Hist_D_Enable&&Stat.shift&&Aida.Wchannels&&Aida_Hist_V_Enable&&Include.Aida&&Aida.channels&&DataAcqPgm&&Aida_Hist_H_Enable&&DataFormat&&ASIC_DMA_HWM&&Aida_Hist_L_Enable > > Unknown option in FEE2 Options database > Unknown entry starts: > et&&Aida_Hist_W_Enable&&TS_SYNC_PHASE&&ExtClk&&Aida.shift&&MACB_TRIG_MODE&&Aida.offset&&RunNumber&&Aida_GroupBase&&Rate.channels&&Stat.channels&&Aida.Vchannels&&ASIC.settings&&WAVE_DMA_H > WM&&Aida_Hist_D_Enable&&Stat.shift&&Aida.Wchannels&&Aida_Hist_V_Enable&&Include.Aida&&Aida.channels&&DataAcqPgm&&Aida_Hist_H_Enable&&DataFormat&&ASIC_DMA_HWM&&Aida_Hist_L_Enable > > 13.37 Detector bias & leakage currents OK - attachment 1 > FEE64 temps OK - attachments 2 > Statistics - good events, ADC data, disc data, info code 4 & 5, pause & resume, correlation - attachments 3-10 > per FEE64 rate spectra - attachments 11 & 12 > per FEE64 1.8.L spectra - attachments 13 & 19 > aida5 peak width 70 ch FWHM, aida06 peak width 89ch FWHM > per FEE64 1.8.W spectra 20us FSR - attachments 14 & 15 > meger & tape server - attachments 16-18 > Encoding: HTML ELCode plain Suppress Email notification

Attachment 1:
Drop attachments here...

ELOG V3.1.4-unknown