AIDA
GELINA
BRIKEN
nToF
CRIB
ISOLDE
CIRCE
nTOFCapture
DESPEC
DTAS
EDI_PSA
179Ta
CARME
StellarModelling
DCF
K40
DESPEC
Draft saved at 00:00:00
Fields marked with
*
are required
Entry time:
Fri Apr 16 15:52:08 2021
Author
*
:
Subject
*
:
Clock status test result: Passed 12, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable Calibration test result: Passed 12, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida05 fault 0xc879 : 0xc87b : 2 aida06 fault 0x323c : 0x323e : 2 aida07 fault 0xfb3a : 0xfb3f : 5 aida08 fault 0xd3d6 : 0xd3d8 : 2 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR FPGA Timestamp error counter test result: Passed 12, Failed 0 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 23 10 3 1 1 2 1 3 3 3 6 : 36156 aida02 : 25 10 4 3 1 2 2 3 3 3 6 : 36500 aida03 : 27 8 5 2 3 4 3 3 2 3 6 : 36092 aida04 : 30 4 4 5 0 2 4 2 3 3 6 : 36472 aida05 : 19 5 7 1 3 2 2 2 2 4 6 : 37060 aida06 : 18 13 1 2 1 3 2 3 3 3 6 : 36544 aida07 : 24 7 3 2 2 3 1 3 2 4 6 : 37384 aida08 : 15 11 2 5 2 4 1 4 3 3 6 : 37076 aida09 : 7 3 4 1 5 6 5 4 3 2 6 : 36308 aida10 : 8 3 13 4 3 3 1 4 2 3 6 : 36040 aida11 : 18 11 17 7 4 4 4 3 2 3 6 : 36752 aida12 : 12 7 7 7 4 4 2 3 2 3 6 : 36024 Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 17:27. Checked system stats, temps, leakage etc. looks ok 18:49. Tape server writing to disk /NULL/R21_9+ /TapeData points to /media/SecondDrive/ - 3.6Tb free 19.15. checks Clock status test result: Passed 12, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable Calibration test result: Passed 12, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida05 fault 0xc879 : 0xc87b : 2 aida06 fault 0x323c : 0x323e : 2 aida07 fault 0xfb3a : 0xfb3f : 5 aida08 fault 0xd3d6 : 0xd3d8 : 2 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida07 fault 0xf : 0x10 : 1 FPGA Timestamp error counter test result: Passed 11, Failed 1 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 16 9 16 2 2 2 1 3 3 3 6 : 36424 aida02 : 1 3 5 4 1 3 3 2 3 3 6 : 36268 aida03 : 24 13 11 6 3 3 2 4 2 3 6 : 36472 aida04 : 5 4 4 4 3 3 3 2 3 3 6 : 36404 aida05 : 17 8 4 2 2 2 2 2 2 4 6 : 36996 aida06 : 26 11 3 2 0 3 2 3 3 3 6 : 36528 aida07 : 24 7 2 1 1 1 2 3 2 4 6 : 37272 aida08 : 13 12 6 3 3 4 1 4 3 3 6 : 37140 aida09 : 22 15 19 2 6 5 4 4 3 2 6 : 36416 aida10 : 16 11 6 4 3 3 1 4 2 3 6 : 36024 aida11 : 12 4 5 4 2 3 3 3 2 3 6 : 35872 aida12 : 18 12 9 4 4 4 2 3 2 3 6 : 36024 Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 19.53. Checked system stats, temps, leakage etc. looks ok 20:30. Checked system stats, temps, leakage etc. looks ok 20:59. Checked system stats, temps, leakage etc. looks ok 21:31 System checks Clock status test result: Passed 12, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable Calibration test result: Passed 12, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida05 fault 0xc879 : 0xc87b : 2 aida06 fault 0x323c : 0x323e : 2 aida07 fault 0xfb3a : 0xfb40 : 6 aida08 fault 0xd3d6 : 0xd3d8 : 2 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida07 fault 0xf : 0x10 : 1 FPGA Timestamp error counter test result: Passed 11, Failed 1 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 21 9 17 3 2 2 1 3 3 3 6 : 36492 aida02 : 5 1 1 6 0 2 2 3 3 3 6 : 36332 aida03 : 2 10 11 6 4 4 3 3 2 3 6 : 36296 aida04 : 27 12 3 4 0 2 3 2 3 3 6 : 36220 aida05 : 19 9 7 2 1 2 2 2 2 4 6 : 36996 aida06 : 28 5 0 4 0 3 1 3 3 3 6 : 36248 aida07 : 19 13 10 6 2 2 1 3 2 4 6 : 37524 aida08 : 18 9 6 0 1 4 1 3 3 3 6 : 36400 aida09 : 17 19 12 3 6 5 4 4 3 2 6 : 36348 aida10 : 23 9 7 4 2 3 1 4 2 3 6 : 35988 aida11 : 19 10 3 3 2 3 3 3 2 3 6 : 35884 aida12 : 12 6 0 3 2 4 2 3 2 3 6 : 35648 Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021 22.06. Checked system stats, temps, leakage etc. looks ok 22.18CEST BNC PB-5 amplitude changed from 1V to 2V fioler NULL/R21_67 22.23CEST All histograms zero'd 22.43. Checked system stats, temps, leakage etc. looks ok 23.21. Checked system stats, temps, leakage etc. looks ok 23.46 system checks Clock status test result: Passed 12, Failed 0 Understand status as follows Status bit 3 : firmware PLL that creates clocks from external clock not locked Status bit 2 : always logic '1' Status bit 1 : LMK3200(2) PLL and clock distribution chip not locked to external clock Status bit 0 : LMK3200(1) PLL and clock distribution chip not locked to external clock If all these bits are not set then the operation of the firmware is unreliable Calibration test result: Passed 12, Failed 0 If any modules fail calibration , check the clock status and open the FADC Align and Control browser page to rerun calibration for that module Base Current Difference aida05 fault 0xc879 : 0xc87b : 2 aida06 fault 0x323c : 0x323e : 2 aida07 fault 0xfb3a : 0xfb40 : 6 aida08 fault 0xd3d6 : 0xd3d8 : 2 White Rabbit error counter test result: Passed 8, Failed 4 Understand the status reports as follows:- Status bit 3 : White Rabbit decoder detected an error in the received data Status bit 2 : Firmware registered WR error, no reload of Timestamp Status bit 0 : White Rabbit decoder reports uncertain of Timestamp information from WR Base Current Difference aida07 fault 0xf : 0x10 : 1 FPGA Timestamp error counter test result: Passed 11, Failed 1 If any of these counts are reported as in error The ASIC readout system has detected a timeslip. That is the timestamp read from the time FIFO is not younger than the last Returned 0 0 0 0 0 0 0 0 0 0 0 0 Mem(KB) : 4 8 16 32 64 128 256 512 1k 2k 4k aida01 : 17 12 7 0 3 3 2 4 2 3 6 : 36180 aida02 : 35 3 5 2 0 2 1 3 3 3 6 : 36148 aida03 : 22 6 10 2 1 3 2 4 2 3 6 : 36136 aida04 : 27 9 3 5 2 4 3 3 2 3 6 : 36100 aida05 : 20 9 3 3 2 2 2 2 2 4 6 : 37032 aida06 : 25 11 1 2 0 3 1 3 3 3 6 : 36236 aida07 : 20 6 6 2 3 3 2 4 1 4 6 : 37216 aida08 : 25 10 0 2 1 3 1 3 3 3 6 : 36276 aida09 : 10 4 3 4 4 5 4 4 3 2 6 : 35960 aida10 : 26 9 3 0 1 3 1 4 2 3 6 : 35744 aida11 : 2 3 4 2 2 3 3 3 2 3 6 : 35744 aida12 : 4 9 7 2 2 4 2 3 2 3 6 : 35720 Collecting the file size of each FEE64 Options CONTENTS file to check they are all the same FEE : aida01 => Options file size is 1025 Last changed Fri Apr 16 01:00:12 CEST 2021 FEE : aida02 => Options file size is 1014 Last changed Fri Apr 16 00:56:20 CEST 2021 FEE : aida03 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida04 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida05 => Options file size is 1025 Last changed Fri Apr 16 00:53:25 CEST 2021 FEE : aida06 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida07 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida08 => Options file size is 1014 Last changed Wed Apr 14 21:52:04 CEST 2021 FEE : aida09 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida10 => Options file size is 1014 Last changed Wed Apr 14 21:52:06 CEST 2021 FEE : aida11 => Options file size is 1014 Last changed Wed Apr 14 21:52:05 CEST 2021 FEE : aida12 => Options file size is 1025 Last changed Wed Apr 14 21:58:54 CEST 2021
Encoding
:
HTML
ELCode
plain
Suppress Email notification
Resubmit as new entry
Attachment 1:
Screenshot_2021-04-16_Statistics_aidas-gsi.png
Original size: 2400x1159
Attachment 2:
Screenshot_2021-04-16_Temperature_and_status_scan_aidas-gsi.png
Original size: 2400x1159
Attachment 3:
10.png
Original size: 502x344
Attachment 4:
Screenshot_2021-04-16_Statistics_aidas-gsi(1).png
Original size: 2144x1035
Attachment 5:
11.png
Original size: 502x344
Attachment 6:
Screenshot_2021-04-16_Temperature_and_status_scan_aidas-gsi(2).png
Original size: 2144x1035
Attachment 7:
Screenshot_2021-04-16_Statistics_aidas-gsi(2).png
Original size: 2144x1035
Attachment 8:
Screenshot_2021-04-16_Temperature_and_status_scan_aidas-gsi(3).png
Original size: 2144x1035
Attachment 9:
12.png
Original size: 502x344
Attachment 10:
Screenshot_2021-04-16_Statistics_aidas-gsi(3).png
Original size: 2144x1035
Attachment 11:
Screenshot_2021-04-16_Temperature_and_status_scan_aidas-gsi(4).png
Original size: 2144x1035
Attachment 12:
13.png
Original size: 502x344
Attachment 13:
Drop attachments here...
Draft saved at 00:00:00
ELOG V3.1.4-unknown